Brand:Stone
Chemical Type：Demoulding Wax
Brand: INEOS
Tensile Strength：63 MPa
Tensile Modulus：3300 MPa
Elongation at Break：4.5%
Flexural Strength：110 MPa
Brand:DOGUIDE
Chemical Type:titanium dioxide pigment
Brand: INEOS
Dynamic Viscosity: 370 mPa·s (cps)
Kinematic Viscosity: 350 cSt
Styrene Content: 44 %
Density: 1.046 g/ml
Brand: Henkel
Technology:Mold Release
Appearance：Translucent white emulsion
Chemical Type：Water based emulsion
Odor：Mild
Cure：Heat cure
Brand: Henkel
Technology:Mold Release
Appearance：Clear to slight blue tint
Chemical Type：Solvent Based Polymer
Odor：Solvent
Cure：Room temperature cure
Brand: SWANCOR
Appearance: Clear amber liquid
Solid Content: 58±1.5%
Viscosity: 380±100 cps
Gel Time: 15-25 min
HDT: 106-110°C
Barcol Hardness: 40±3
Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：35000-60000 mPa.s);（Typical Value Base Gelcoat Spray：21000-40000 mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：5700-7300 mPa.s);（Typical Value Base Gelcoat Spray：3500-5200 mPa.s)
Gel time at 25 ℃: (Typical ValueBase Gelcoat Brush：12-18 minutes);（Typical Value Base Gelcoat Spray：8-15 minutes)
Brand: SKYE
TiO2 content: 95%
Inorganic coating: Alumina; Zirconia
Oil absorption: 18g/100g
CAS number: 13463-67-7
Color index: Pigment White 6
Brand:Polylite
Appearance: Transparent light brownish-yellow liquid
Viscosity: 0.25±0.10 Pa·s
Acid value: 10±3 mg KOH/g
Solids content: 55±3%
Gel time: 25±5 min
Stability: 3 months in a dark place
