ZC-AGE is a C12-14 alkyl glycidyl ether (CAS 68609-97-2) supplied as a monofunctional epoxy reactive diluent for general-purpose epoxy resin systems. Formulators sourcing ZC-AGE use it to cut the viscosity of epoxy floor coatings, potting compounds, casting materials and insulation impregnation resins, while the long aliphatic chain adds flexibility to the cured film.
Per the product data sheet, the diluent is a colorless, transparent liquid with low toxicity, low volatility and no noticeable color or odor. It wets non-polar surfaces well and gives outstanding wetting of pigments and fillers, which helps highly filled epoxy formulations stay workable.

ZC-AGE Typical Characteristics
The diluent is offered in two grades that differ only in epoxy value, so buyers can match the grade to the epoxy equivalent their formulation is built around.
| Item | ZC-AGE Low | ZC-AGE High |
|---|---|---|
| Appearance | Colorless and transparent liquid | Colorless and transparent liquid |
| Epoxy Value (eq/100g) | 0.32–0.34 | 0.34–0.36 |
| Hydrolyzable Chloride (ppm) | ≤1000 | ≤1000 |
| Inorganic Chloride (ppm) | ≤20 | ≤20 |
| Viscosity (cps/25℃) | 6–12 | 6–12 |
| Color (APHA) | ≤20 | ≤20 |
| Moisture (%) | <0.1 | <0.1 |
Epoxy value is commonly checked against the titration method in ASTM D1652, which buyers can use when comparing incoming lots with the data sheet. Additional physical data from the safety data sheet: relative density 0.89 g/cm³ at 25℃, flash point 113℃ (closed cup), and very low water solubility.
Key Features
- Strong viscosity reduction for general-purpose epoxy resins (6–12 cps at 25℃)
- Monofunctional reactive diluent that also acts as a toughening agent, adding flexibility
- Colorless (APHA ≤20) and odorless, suited to clear and light-colored systems
- Low volatility and low toxicity
- Good wetting of non-polar surfaces, pigments and fillers
Applications of ZC-AGE Epoxy Reactive Diluent
The data sheet lists ZC-AGE as a diluent and toughening agent for:
- Epoxy floor coatings – lower viscosity for easier self-leveling and better filler wetting
- Epoxy potting compounds – improved flow into electronic assemblies
- Casting materials – easier pouring and degassing
- Insulation impregnation – better penetration into windings and porous parts
Buyers can source the diluent together with base resins from our epoxy and composite resin range, and compare it with the related TT-AGE grade listed in our auxiliary agent catalog.
Packaging, Storage and Safe Handling
ZC-AGE is packed in clean, dry iron drums with tightly sealed lids to prevent moisture absorption. Standard net weights are 25 kg and 200 kg; other packaging can be agreed by contract. Store the drums in a well-ventilated, cool and dry warehouse, away from fire and heat sources, and do not stack or store them in the open air. Shelf life is 1 year from the production date; material past this date can be re-inspected and used if it still meets the quality requirements.
Under the safety data sheet it is classified as Skin Irritation Category 2 and Skin Sensitization Category 1 (signal word: Warning), so wear chemical goggles and impermeable gloves and avoid skin contact. It is listed as non-dangerous goods for land, sea and air transport. Keep it away from strong oxidants and strong acids. The TDS and SDS are available on request.
Frequently Asked Questions About ZC-AGE
What is ZC-AGE?
It is a C12-14 alkyl glycidyl ether (CAS 68609-97-2, content above 99%), used as a monofunctional reactive diluent for epoxy resins.
What is the difference between the Low and High grades?
Only the epoxy value: 0.32–0.34 eq/100g for the Low grade and 0.34–0.36 eq/100g for the High grade. All other listed properties are the same.
Is it classified as dangerous goods for shipping?
No. The safety data sheet lists it as non-dangerous goods for land, marine and air transport.
What packaging is available?
25 kg and 200 kg iron drums as standard, with other specifications by agreement.
Request a Quote for ZC-AGE
Send us your epoxy system, target viscosity and monthly volume at info@chemicalsstore.com, and we will confirm the right grade, packaging and lead time and send the TDS and SDS with your quote.