Brand: Henkel
Technology:Mold Release
Appearance：Translucent white emulsion
Chemical Type：Water based emulsion
Odor：Mild
Cure：Heat cure
Brand: Henkel
Technology:Mold Release
Appearance：Clear to slight blue tint
Chemical Type：Solvent Based Polymer
Odor：Solvent
Cure：Room temperature cure
Product family: Hot Melt Adhesive
Product type: Pressure Sensitive Adhesive (PSA)
Grade: TECHNOMELT® PS 1573 E
Adhesive technology: Hot melt pressure sensitive adhesive
Substrate compatibility: Paper labels, film labels and low surface energy substrates
Key features: Moderate adhesion across various substrates, good initial tack, good low-temperature toughness, suitable for both paper and film labels
Brand: Henkel
Chemical Type: Ethyl cyanoacrylat
Appearance (uncured): Black liquLMS
Components：One part – requires no mix
Viscosity：High
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Rubb
Brand: Henkel
Chemical Type: Epoxy
Appearance (Resin):Off-whiteLMS
Appearance (Hardener):greenLMS
Appearance (Mixture):Off-whiteLMS
Components:Two part – Resin & Hardener
Mix Ratio, by weight -Resin : Hardener:100:4
Mix Ratio, (by volume)Resin : Hardener:2.5:1
Cure:Room temperature cure after mixing
Brand: Henkel
Chemical Type: Epoxy
Appearance (Mixed):Steel Colored Paste
Mix Ratio, by volume -Resin : Hardener|：1:1
Mix Ratio, by weight -Resin : Hardener：100 : 56.5
Cure:Room temperature cure after mixing
Application：North America – Metal Repair
Specific Benefit：
● Hardens in ten minutes
● Non sagging
● Steel filled system – cures to metal-like finish
● Bonds to steel, cast iron,stainless steel, concrete,copper, aluminum, and clean and abraded bronze
Brand: Henkel
Technology:Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Solven
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Mold Sealer
Application Temperature：20 to 60 °C
Specific Benefit：
● No contaminating transfer
● High thermal stability
● Seals mold porosity, scratches or imperfections
Brand: Henkel
Technology:Epoxy Resin
Additional Information:2-component solvent free toughend epoxy resin
Product type: Two-component epoxy structural adhesive
Grade: TEROSON® EP 5055
Chemical nature: Epoxy resin (Part A) + amine hardener (Part B)
Mixing ratio A:B: 1:1 by volume
Brand: Henkel
Technology:Silicone
Chemical Type:Oxime silicone
Appearance:Black pasteLMS
Components:One component -requires no mixing
Viscosity:Thixotropic paste
Cure：Room temperature vulcanizing (RTV)
Application:Sealing
Specific Benefits:Excellent resistance to automotive engine oils.
Brand: Henkel
Technology:Solvent based
Chemical Type:Modified resin, fillers and alcohol
Appearance:Brown liquidLMS
Viscosity:Flow similar to SAE 10 Motor Oil
Cure：Air dry
Application:Gasketing & sealing
Specific Benefits:
● For close tolerance flanges
● Slow drying
● Flexible setting
Brand: Henkel
Technology:Anti-Seize
Appearance:Smooth copper colored pasteLMS
Cure：Non-curing
Application:Lubrication
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:White or light creme suspensionLMS
Odor:Hydrocarbon
Cure：Room temperature cure
Cured Thermal Stability:≤280 °C
Application:Release Coatings
Application Temperature:15 to 35 °C
Specific Benefit:
● High gloss finish
● Multiple releases
● Minimal mold build-up
● Easy application
● Low odor
● Visible mold coverage
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:13 to 135 °C
Brand: Henkel
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:20 to 60 °C
Specific Benefit:
● Fast drying
● Non-contaminating transfer
● High thermal stability
● Non-CFC
● No mold build-up
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:20 to 60 °C
Specific Benefit:
● Fast drying
● Non-contaminating transfer
● High thermal stability
● Non-CFC
● No mold build-up
Brand: Henkel
Chemical Type: Epoxy
Appearance (Resin):White liquidLMS
Appearance (Hardener)：Gray liquidLMS
Components：Two component – requires mixing
Mix Ratio, by volume -Resin : Hardener：2 : 1
Mix Ratio, by weight -Resin : Hardener：100:50
Cure:Room temperature cure
Application：Bonding
Brand: Henkel
Technology:Acrylic
Chemical Type: Urethane methacrylate
Appearance (uncured):Green liquidLMS
Fluorescence：Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Anaerobic
Secondary Cure:Activator
Application：Retaining
Strength: High
Brand: Henkel
Chemical Type: Methacrylate ester
Appearance (uncured):Green liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Secondary Cure:Activator
Application：Retaining
Strength: Medium to High
Brand: Henkel
Technology:Acrylic
Chemical Type: Dimethacrylate ester
Appearance (uncured):Green pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Gasketing and Sealing
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured):Yellow pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Thread sealing
Brand: Henkel
Technology：Acrylic
Chemical Type: Methacrylate ester
Appearance (uncured):Opaque, dark purpleLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Application: Sealing
Brand: Henkel
Chemical Type: Alkoxyethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Elastomers
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Clear liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Humidity
Application: Bonding
Key Substrates：Rubbers, Plastics and Metals
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
