AOC Resin

– Explore Our Full Product Range
Unsaturated polyester, vinyl ester, SMC/BMC and gelcoat grades from AOC’s Palatal, Atlac, Synolite, Palapreg and Neogel families, sorted by the process you run. Each grade links to its datasheet page; TDS and SDS are sent on request.

Can’t find the grade in the tables? AOC makes many more variants (different HDT, Tg and styrene content). Send us your process and requirement and we will check availability.

AOC Resin

AOC Resin Product Families

Palatal® & Synolite™

Unsaturated polyester resins: orthophthalic, isophthalic, iso/NPG and DCPD bases for laminating, casting, filament winding and infusion. Pre-accelerated and thixotropic versions are common for open moulding.

Atlac®

Vinyl ester and vinyl ester urethane resins for corrosion-resistant FRP: chemical tanks, pipes, scrubbers and marine laminates that face hydrolysis or high temperature.

Palapreg®

Resins and low-profile additives for SMC and BMC compression moulding, from general parts to Class-A automotive surfaces and lamp reflectors.

Neogel®

Gelcoats for the visible surface of FRP parts: iso/NPG weather and blister-resistant grades, high-gloss grades, fire-retardant grades and vinyl ester mould gelcoats.

Neomould® & Neobond®

Tooling resin for dimensionally stable moulds, and vinyl ester bonding paste for structural joints in boats and large FRP assemblies.

Vipel™ & Beyone™

Vipel offers corrosion-resistant resins for tanks, pipes and industrial FRP. Beyone provides styrene-free resins and specialty formulations for advanced composites.

Hand lay-up & spray-up laminating resins

Laminating resins for open moulding of boat hulls, decks, panels and general FRP parts, including pre-accelerated, thixotropic and low-styrene-emission grades.

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Tough, impact-resistant vinyl ester urethane

400–500 mPa·s

33–43 min

—

BPA urethane vinyl ester, marine grade; Lloyd’s Register and RINA

—

—

220 kg

CCS-certified boat building laminating resin

180–250 mPa·s

40–70 min

220 / 1100 kg

Marine laminating unsaturated polyester resin

180–220 mPa·s

20–38 min

220 kg

Hand lay-up & spray-up laminating resin

180–220 mPa·s

20–38 min

230 kg

Low-styrene-emission laminating resin

180–220 mPa·s

22–40 min

220 kg

Pre-accelerated thixotropic ortho resin with cure indicator; marine, sanitary and leisure; LR and CCS approved

180–220 mPa·s

20–30 min

-

Pre-accelerated thixotropic DCPD resin, low styrene emission, low shrinkage; LR and CCS approved

260–300 mPa·s

42–47 min

220 kg

Pre-accelerated thixotropic ortho resin with cure indicator, wax-free; LR and CCS approved

180–220 mPa·s

20–30 min

20 kg

Pre-accelerated thixotropic ortho resin for sanitary backing layers; low exotherm, high filler loading

100–150 mPa·s

15–25 min

220 kg

Gel time measured 25→35 °C per AOC test method. Grades without a datasheet page:

Chemical-resistant resins for pipes, tanks and ducts

Vinyl ester and iso/NPG resins for filament winding, hand lay-up and pultrusion of parts exposed to acids, alkalis, solvents and heat.

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Bisphenol-A epoxy vinyl ester for corrosive environments

400–550 mPa·s

10–17 min

220 kg

Standard epoxy vinyl ester resin

400–500 mPa·s

35–55 min

210 kg

Low-viscosity BPA epoxy vinyl ester

180–250 mPa·s

—

220 kg

Hydrocarbon-resistant vinyl ester for GRP

450–550 mPa·s

21–36 min

220 kg

Novolac epoxy vinyl ester

450–550 mPa·s

28–38 min

-

Novolac epoxy vinyl ester

400–550 mPa·s

12–25 min

220 kg

Isophthalic unsaturated polyester resin

400–550 mPa·s

15–25 min

220 / 1100 kg

Isophthalic/NPG resin for corrosive environments

1,100–1,400 mPa·s

9–15 min

220 kg

Atlac 430 grades with a suffix (ACT, LV GT250, S, ACT-GT60) differ in function.

Fire-retardant resins

Resins for parts that must meet fire and smoke requirements. Fire-retardant gelcoats are listed under Gelcoats.

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Brominated vinyl ester, fire-retardant and anticorrosion

300–500 mPa·s

18–30 min

220 kg

Halogen-free fire-retardant unsaturated polyester

670–870 mPa·s (20 s⁻¹)

9–11 min

220 kg

Infusion, casting and general-purpose resins

DCPD grades for resin infusion and RTM, low-shrink grades for casting, and general structural laminating resins.

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Heat-resistant UP resin for FRP moulding

400–550 mPa·s

15–22 min

230 kg

Low-shrink pre-accelerated resin for casting

300–500 mPa·s 3

30–45 min

-

General-purpose structural FRP resin

400–500 mPa·s

15–22 min

220 kg

Medium-viscous DCPD polyester, low peak exotherm

260–300 mPa·s

42–47 min

-

Unsaturated polyester resin

200–700 mPa·s

14–45 min

220 kg

SMC and BMC moulding resins and additives

Base resins and low-profile additives for compression moulding. Gel times are measured at 80→140 °C.

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

BMC lamp reflector / weather-resistant SMC-BMC

1,700–2,300 mPa·s

-

1000 kg

PVAc additive for SMC/BMC stiffness and strength

1,800–2,200 mPa·s

-

200 kg

Low-shrink SMC/BMC resin, high gloss

1,600–1,900 mPa·s

40–70 s

230 / 1100 kg

Class-A SMC resin, high gloss

1,600–1,900 mPa·s

40–70 s

220 kg

SMC/BMC polyester resin

1,300–1,600 mPa·s

70–110 s

-

Palapreg H grades are additives used together with a Palapreg base resin.

Neogel gelcoats

Surface coats for FRP parts, grouped by series: fire-retardant, iso/NPG weather and blister-resistant, and high-gloss grades. Mould gelcoats are listed under Tooling.

Fire-retardant gelcoats · A400TV-F

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Fire-retardant gelcoat

-

12–20 / 8–16 min

-

Semi-gloss fire-retardant gelcoat

50,000–80,000 brush

12–20 / 8–16 min

24.2 kg

Fire-retardant marine gelcoat

50,000–80,000 brush

12–20 / 8–16 min

-

Low-smoke fire-retardant gelcoat

50,000–80,000 brush

12–20 / 8–16 min

24.2 kg

Fire-retardant gelcoat

50,000–80,000 brush

12–20 / 8–16 min

24.2 kg

Fire-retardant gelcoat

50,000–80,000 brush

12–20 / 8–16 min

-

ISO-NPG fire-retardant gelcoat

50,000–80,000 brush

12–20 / 8–16 min

24.2 kg

Fire-retardant gelcoat

50,000–80,000 brush

12–20 / 8–16 min

23.5 kg

Iso/NPG gelcoats · 8373-W

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Water and weather-resistant gelcoat

42,500–52,000 spray

12–20 / 8–16 min

22 kg

Water and weather-resistant gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

22 kg

Water and weather-resistant gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

22 kg

Water, weather and blister-resistant gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

22 kg

NPG marine UV gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

22 kg

Water and weather-resistant gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

22 kg

NPG UV gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

22 kg

Iso/NPG gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

22 kg

Isophthalic NPG polyester gelcoat

42,500–52,000 spray

12–20 / 8–16 min

22 kg

Iso/NPG gelcoat

35,000–60,000

12–20 / 8–16 min

22.5 kg

8373-T series

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Air-drying repair gelcoat

-

8–15 min

23 kg

8373-I and 8373-SR series

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Transparent ISO-NPG gelcoat

13,500–18,500

8–12 min

23.2 kg

High-gloss and other gelcoats · 8300 / 8305 / 8366 / A400

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Water and weather-resistant gelcoat

42,500–52,000 spray

12–20 / 8–16 min

220 kg

Water and weather-resistant gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

210 kg

Water and weather-resistant gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

220 kg

Water, weather and blister-resistant gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

220 kg

NPG marine UV gelcoat

35,000–60,000 brush / 21,000–40,000 spray

12–20 / 8–16 min

-

Gelcoat viscosity measured at 25 °C, #4 spindle, rpm2. The four digits after the series (e.g. -9735) are the colour code;

Tooling resins, mould gelcoats and bonding paste

Materials for building stable FRP moulds and for structural bonding of large assemblies.

GRADE

TYPE / KEY FEATURE

VISCOSITY @23–25°C

GEL TIME

PACK / DRUM

Datasheet

Quote

Vinyl ester structural adhesive

1,200–2,000 mPa·s

55–65 min

25 kg

Vinyl ester mould gelcoat

30,000–36,000 mPa·s

10–16 min

23 kg

Vinyl ester mould gelcoat

30,000–36,000 mPa·s

10–16 min

25.5 kg

Vinyl ester mould gelcoat

30,000–36,000 mPa·s

10–16 min

23.5 kg

Zero-shrinkage mould resin

620–680 mPa·s

38–42 min

25 kg

Neobond gel time measured on a 200 g paste with 2% MEKP (M-50) at 23 °C.

Need an AOC grade that is not listed?

Tell us the process (hand lay-up, infusion, filament winding, pultrusion, SMC), the property you need (HDT, chemical resistance, fire class, styrene content) and your monthly volume. We check AOC grades and equivalent options and reply with TDS and lead time.

AOC Resin buying FAQ

Q : Which AOC resin is right for a chemical storage tank?

A :Most acid and alkali service uses Atlac 430 or Atlac 430 ACT. For higher temperature or solvent exposure, look at the novolac grades Atlac 590Z and 590UHT. Send us the chemical, concentration and temperature and we will suggest a grade.

Q : What packaging and minimum order do you offer?

A :Packaging and minimum quantity depend on the grade. Tell us the grade and your monthly volume in the inquiry form and we will confirm the options.

Q : Which catalyst should I use with these resins?

A :Room-temperature grades cure with a standard MEKP catalyst; SMC/BMC grades use hot-cure peroxides. We can quote the resin and initiator together.

Q : Can these resins be cured with MEKP at room temperature?

A: Most grades listed above can be cured at room temperature using a standard MEKP catalyst. You can browse our organic peroxides to source compatible resins and initiators together.

Get a Quick Quote

Fill out the form below and we will contact you shortly.