Welcome to a new and smarter way of buying and selling—a digital B2B marketplace tailored for composite materials!
Thousands Chemical vets each and every supplier to make sure you receive high quality products fast!
Brand:Nouryon
CAS number:84238-53-9 and 68910-05-4
Physical form:Viscous liquid
Color：Yellow
Odor：Ammonical
Flammability, liquids:Not classified as a flammability hazard
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:133-14-2
Physical form:Off-white homogeneous paste
Molecular Weight:380.0
Chemical name:Di(2,4-dichlorobenzoyl) peroxide
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:1338-23-4; 80-15-9
Physical form:Liquid
Chemical name:Mixture of methyl ethyl ketone peroxide and cumyl hydroperoxide, in solvent mixture
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:614-45-9, 37187-22-7
Physical form:Liquid
Chemical name:Mixture of acetylacetone peroxide and tert-butyl peroxybenzoate in solvents
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:1338-23-4, 80-15-9
Physical form:Liquid
Chemical name:Methyl ethyl ketone peroxide and cumyl hydroperoxide, solution in dimethyl phthalate
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:13052-09-0
Physical form:Liquid
Chemical name:2,5-Dimethyl-2,5-di(2-ethylhexanoylperoxy) hexane
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:686-31-7
Physical form:Liquid
Molecular Weight:230.3
Chemical name:tert-Amyl peroxy-2-ethylhexanoate
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:2372-21-6
Physical form:Liquid
Molecular Weight:176.2
Chemical name:tert-Butylperoxy isopropyl carbonate, 75% solution in odorless mineral sprits
Brand: INEOS
Property at 23 °C
Viscosity, Brookfield RV2, 10 rpm:1400 mPas at ISO 2555
Viscosity, cone&plate:180 mPas at ISO 2884
Styrene content: 41% at ASTM D 1644
Density:1.1 kg/dm3 at ISO 2811
Geltime, 1% MEKP-50:40 min at Hc-04a
Peak exotherm:110 °C at Hc-04a
Brand:SWANCOR
Appearance:Transparent brown yellow liquid
Density：1.05-1.07kg/L
Viscosity：350±100cps
Solid content：55±1%
Gel time：15±5min
Shelf life：6 month(below 25℃）
Brand:SWANCOR
Appearance:viscous liquid
Viscosity:600±100cps(small difference according to different color)
Gel time: 10-20 minutes （55%MEKP,1.0-2.0% ）
Thixotropic value:＞1.5
Shelf life: 3 month( below 20℃）
Brand:SWANCOR
Appearance:Brown translucent layered fluid
Gel time：20-30min
Suitable substrate:iron
Bonding strength：ASTMD1002， test rate:5mm/min
Iron:130kg/㎡
Brand:SWANCOR
Surface：Transparent liquid
Flash point：32℃
Dynamic 32℃ viscosity：＜ 20cps（ 25℃)
Solid＜ 20cps（ 25℃) content：6±2%
Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand:SWANCOR
Brand:SWANCOR
Appearance: Clear yellow liquid
Solid Content(%)：73.5~69.5
Specific Gravity：1.08~1.12 g/cm3
Gel Time (min)：25~35
Shelf Life(months)：6
Brand：JUSHI
Brand：JUSHI
Glass type：E6
Sizing type：Silane
Typical filament diameter (μm）：12,21,24
Brand：JUSHI
Glass type：E
Sizing type：Silane
Typical filament diameter (μm）：12
Brand：JUSHI
Glass Type：E
Assembled Roving：R
Filament Diameter(μm)：11,13
Brand: Henkel
Chemical Type: Epoxy
Appearance (Mixed):Steel Colored Paste
Mix Ratio, by volume -Resin : Hardener|：1:1
Mix Ratio, by weight -Resin : Hardener：100 : 56.5
Cure:Room temperature cure after mixing
Application：North America – Metal Repair
Specific Benefit：
● Hardens in ten minutes
● Non sagging
● Steel filled system – cures to metal-like finish
● Bonds to steel, cast iron,stainless steel, concrete,copper, aluminum, and clean and abraded bronze
Brand: Henkel
Technology:Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Solven
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Mold Sealer
Application Temperature：20 to 60 °C
Specific Benefit：
● No contaminating transfer
● High thermal stability
● Seals mold porosity, scratches or imperfections
Brand:BYK
Density (68 °F): 7.20 lbs/US gal
Refractive index (68 °F): 1.48
Brand:BYK
Active substance: 52%
Density (68 °F): 9.43 lbs/US gal
Solvents: N-Methylpyrrolidon
Flash point: 196 °F
Brand:BYK
Density (20 °C): 0.95 g/ml
Non-volatile matter (20 min., 150 °C): 51%
Solvents: Solvent Naphtha/diisobutyl ketone 9/1
Flash point: 45 °C
Brand:OXBOND
Chemical Type：Demoulding Wax
Brand:OXBOND
Chemical Type：Release Paste Wax
Brand:OXBOND
Chemical Type：Polishing Paste
We changed that so we could save you money. By connecting you directly to chemical manufacturers, Thousands Chemical buyers access top-quality products at manufacturer prices.
Thousand Chemicals empowers your business to rethink how you buy chemicals. Want to decrease your safety stock or purchase on an as-needed basis?
Full transparency into prices, inventories,suppliers, delivery dates, product specs, and more to ensure your business can make a confident purchasing decision every time.
Our customer service team is happy to help andavailable 24/7.
