Synolite 0740-P-915

Synolite 0740-P-915 is a thixotropic, pre-accelerated orthophthalic unsaturated polyester resin for the structural backing layer of acrylic sanitaryware, with low viscosity, low exotherm and good filler tolerance.

Synolite 0740-P-915 is a thixotropic, pre-accelerated, general-purpose orthophthalic unsaturated polyester resin from AOC, designed as a structural backing-layer resin for sanitaryware. Fabricators use Synolite 0740-P-915 to reinforce acrylic bathtubs, shower trays and similar parts by hand lay-up or spray-up. The resin has low viscosity, medium reactivity, and contains no wax.

Key Features

  • Low viscosity with very good wetting of glass fiber, suited to hand lay-up and spray-up
  • Low exotherm during cure, so even a thick one-shot laminate will not scorch the acrylic sheet
  • Low shrinkage after cure, light color and low odor
  • Especially suitable for use with fillers, and still sprayable at high filler loadings

Synolite 0740-P-915 Technical Data

Product Specification

PropertyRangeUnitTest Method
AppearanceHazy–TM 2265
Viscosity @ 23℃ (Z2, 250 s⁻¹)100–150mPa·sTM 2313
Solids content51–56%TM 2033
Gel time (25℃ to 35℃)15–25minTM 2625
Reactivity at 25℃: 2.0 g Butanox M-50 added to 100 g resin.

Liquid Resin Typical Properties

PropertyValueUnitTest Method
Flash point33℃TM 2800
Shelf life (25℃, no initiator, dark)3months–

Unfilled Casting Typical Properties

PropertyValueUnitTest Method
Tensile strength60MPaISO 527-2
Tensile modulus3500MPaISO 527-2
Elongation at break2.3%ISO 527-2
Flexural strength100MPaISO 178
Flexural modulus3600MPaISO 178
Heat deflection temperature90℃ISO 75-A
Cured with 2% Butanox M-50; 24 h at room temperature, then post-cured 24 h at 80℃.

Tensile properties are tested to ISO 527-2, flexural properties to ISO 178 and HDT to ISO 75-A.

Applications of Synolite 0740-P-915 Sanitaryware Resin

The resin is built for the structural reinforcement layer behind acrylic sanitaryware, such as bathtubs, shower trays and wash basins. Its low exotherm protects the acrylic surface when thick laminates are built in one step, and its low shrinkage helps keep the finished part flat and stable. Because it handles high filler loadings and can still be sprayed, it suits filled backing laminates where material cost matters. Source a matching MEKP catalyst from our organic peroxide range, or browse other grades in our resin catalog.

Storage

  • Before use, keep the resin in its original, unopened and undamaged packaging in a dry indoor area at 5℃–30℃, and use it as soon as possible.
  • If the resin will not be used for a long time, store it in the original packaging at low temperature or in cold storage.
  • Higher temperatures and exposure to light noticeably shorten storage life, so keep it away from direct sunlight and heat sources. Excessive temperature may cause gelation and affect curing.
  • Styrene-containing unsaturated polyester resin is flammable; keep it away from open flames and refer to the safety data sheet.

The TDS and SDS for Synolite 0740-P-915 are available on request.

Frequently Asked Questions About Synolite 0740-P-915

What is Synolite 0740-P-915 used for?

It is a structural backing-layer resin for sanitaryware, applied by hand lay-up or spray-up behind acrylic sheets.

Will it damage the acrylic sheet?

Per the data sheet, its low cure exotherm means even a thick one-shot laminate will not scorch the acrylic.

Can it be used with fillers?

Yes. It is especially suitable for filled formulations and remains sprayable at high filler ratios.

What is the shelf life?

3 months at 25℃ without initiator, stored in the dark.

Request a Quote for Synolite 0740-P-915

Send us your sanitaryware type, process and monthly volume at info@chemicalsstore.com, and we will confirm availability and lead time and send the TDS and SDS with your quote.

Transportation

To make chemical sourcing more efficient reliable, and intelligent

Our Partners

Packaging & Shipping

Every process of our packaging is very strict
just to betterdeliver the goods to your hands!

Secure Payment

PAYMENT OA,DP,VTB,T/T,Westem Union, MoneyGram, Paypa

Synolite NN-I-2

Brand:AOC
Appearance:Hazy
Viscosity, 23°C:200 – 700 mPa.s
Gel time from 25 to 35°C:14 – 45 minutes

Synolite 1967-G-3

Brand:AOC
Appearance:clear
Viscosity, 23°C:260 – 300 mPa.s
Solids content, IR:64.0 – 67.0%
Gel time from 25 to 35°C:42 – 47 minutes
Cure time from 25°C to peak:52-56 minutes
Peak temperature:120 – 150 °C

Get a Quote

Get a Quick Quote

Fill out the form below and we will contact you shortly.