Brand: AOC
Appearance: Clear-sl Hazy
Solids content: 50 – 56 %
Viscosity @23℃，100 s<sup>-1</sup>:450-550 mPa.s
Gel time (25 until 35 ℃): 21-36min
Brand: AOC
Appreance: Clear-Slight hazy
Viscosity @23℃: 1700-2300 mPa.s
Solids content: 33-35 %
Product type: SMC/BMC resin
Grade: Palapreg® H 856-902
Processing methods: SMC and BMC molding
Brand: Henkel
Chemical Type: Ethyl cyanoacrylat
Appearance (uncured): Black liquLMS
Components：One part – requires no mix
Viscosity：High
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Rubb
Brand: Henkel
Technology:Silicone
Chemical Type:Oxime silicone
Appearance:Black pasteLMS
Components:One component -requires no mixing
Viscosity:Thixotropic paste
Cure：Room temperature vulcanizing (RTV)
Application:Sealing
Specific Benefits:Excellent resistance to automotive engine oils.
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:White or light creme suspensionLMS
Odor:Hydrocarbon
Cure：Room temperature cure
Cured Thermal Stability:≤280 °C
Application:Release Coatings
Application Temperature:15 to 35 °C
Specific Benefit:
● High gloss finish
● Multiple releases
● Minimal mold build-up
● Easy application
● Low odor
● Visible mold coverage
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:13 to 135 °C
Brand: Henkel
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:20 to 60 °C
Specific Benefit:
● Fast drying
● Non-contaminating transfer
● High thermal stability
● Non-CFC
● No mold build-up
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:20 to 60 °C
Specific Benefit:
● Fast drying
● Non-contaminating transfer
● High thermal stability
● Non-CFC
● No mold build-up
Brand: Henkel
Chemical Type: Epoxy
Appearance (Resin):White liquidLMS
Appearance (Hardener)：Gray liquidLMS
Components：Two component – requires mixing
Mix Ratio, by volume -Resin : Hardener：2 : 1
Mix Ratio, by weight -Resin : Hardener：100:50
Cure:Room temperature cure
Application：Bonding
Brand: Henkel
Technology:Acrylic
Chemical Type: Urethane methacrylate
Appearance (uncured):Green liquidLMS
Fluorescence：Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Anaerobic
Secondary Cure:Activator
Application：Retaining
Strength: High
Brand: Henkel
Chemical Type: Methacrylate ester
Appearance (uncured):Green liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Secondary Cure:Activator
Application：Retaining
Strength: Medium to High
Brand: Henkel
Technology:Acrylic
Chemical Type: Dimethacrylate ester
Appearance (uncured):Green pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Gasketing and Sealing
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured):Yellow pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Thread sealing
Brand: Henkel
Chemical Type: Alkoxyethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Elastomers
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Clear liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Humidity
Application: Bonding
Key Substrates：Rubbers, Plastics and Metals
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
Brand:NanYa
Physical State:Solid particles
Epoxy Equivalent Weight (g/eq):200~220
Hydrolyzable chlorine(ppm):500
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Elastomers
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 184～190
Color (Gardner) :1.0max
Flash Point (℃) :150↑
Viscosity(cps，at 25 ℃) :12000～15000
Hydrolyzabie chlorine (ppm) :1000↓
Density (g/cm3 25℃) :1.16
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Blue
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 176～184
Hydrolyzable chlorine（ ppm）:300↓
Color（Gardner）：0.0~1.0
Viscosity(cps，at 25 ℃) :8000～11000
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 450～500
Color (Gardner)：1.0max
Flash Point (℃)：200↑
Softening point ( 25 ℃)：64～74
Solution viscosity ( at 25 ℃)：D～F
Density (g/cm3 25℃):1.18
Brand:NanYa
Physical State:Solid
Epoxy Equivalent Weight (g/eq):380～410
Soften point:64～74 ℃
Hydrolyzable chlorine(PPM):200 max
Br content:46～50%
Color (Gardner)：1.0max
