Brand: Henkel
Chemical Type: Methacrylate ester
Appearance (uncured):Green liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Secondary Cure:Activator
Application：Retaining
Strength: Medium to High
Brand: Henkel
Technology:Acrylic
Chemical Type: Dimethacrylate ester
Appearance (uncured):Green pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Gasketing and Sealing
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured):Yellow pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Thread sealing
Brand: Henkel
Technology：Acrylic
Chemical Type: Methacrylate ester
Appearance (uncured):Opaque, dark purpleLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Application: Sealing
Brand:NanYa
Physical State:Solid particles
Epoxy Equivalent Weight (g/eq):200~220
Hydrolyzable chlorine(ppm):500
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Low
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：High
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium to High
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 184～190
Color (Gardner) :1.0max
Flash Point (℃) :150↑
Viscosity(cps，at 25 ℃) :12000～15000
Hydrolyzabie chlorine (ppm) :1000↓
Density (g/cm3 25℃) :1.16
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Blue
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 176～184
Hydrolyzable chlorine（ ppm）:300↓
Color（Gardner）：0.0~1.0
Viscosity(cps，at 25 ℃) :8000～11000
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 450～500
Color (Gardner)：1.0max
Flash Point (℃)：200↑
Softening point ( 25 ℃)：64～74
Solution viscosity ( at 25 ℃)：D～F
Density (g/cm3 25℃):1.18
Brand:NanYa
Physical State:Semi Solid
Epoxy Equivalent Weight (g/eq):170～190
Color (Gardner)：3.0max
Solution viscosity *(25℃):H～J
Brand:NanYa
Physical State：Liquid
Epoxy Equivalent Weight (g/eq)：300～330
Color (Gardner)：1.0max
Viscosity (cps，at 25 ℃):3000～7000
N.V (%):79～81
Brand:BASF
Physical form:yellowish liquid
Storage：Efka® PU 4063 should be stored in a cool and dry place.
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® PU 4010 may partially solidify when stored below 10 °C (50 °F). Heat to 35–40 °C (95–104 °F) to reliquify.
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® FA 4611 should be stored in tightly closed containers and in a cool place. Mix well before use. If separation or turbidity is observed, heat product to 30–40°C and homogenize by stirring.
Brand:SWANCOR
Appearance ：amber, clear liquid
Viscosity ：100-300 cps
Gel time ：15～35 min.
Shelf life ：6 months
Brand:SWANCOR
Appearance: Clear yellow liquid
Solid Content(%)：73.5~69.5
Specific Gravity：1.08~1.12 g/cm3
Gel Time (min)：25~35
Shelf Life(months)：6
Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):35000-60000 mPa.s
Viscosity at 25℃ (#4, rpm20):5700-7300 mPa.s
Geltime at 25℃: 12-18 min
Brand: SWANCOR®
Product family: Auxiliary Agent
Product type: Resin promoter / accelerator
Grade: SWANCOR 1305
Key features: Controlled curing, good low-temperature performance, humidity resistance
Main applications: FRP resin curing systems
Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand:SWANCOR
Surface：Transparent liquid
Flash point：32℃
Dynamic 32℃ viscosity：＜ 20cps（ 25℃)
Solid＜ 20cps（ 25℃) content：6±2%
Brand:SWANCOR
Appearance:Transparent brown yellow liquid
Density：1.05-1.07kg/L
Viscosity：350±100cps
Solid content：55±1%
Gel time：15±5min
Shelf life：6 month(below 25℃）
