NPSN-136X80 Epoxy Resin

NPEL-127E

Diglycidyl ether of Bisphenol-A

Brand:NanYa
Epoxy Equivalent Weight (g/eq): 176~184
Hydrolyzable chlorine( ppm):300↓
Color(Gardner):0.0~1.0
Viscosity(cps,at 25 ℃) :8000~11000

NPSN-136X80 Epoxy Resin

NPES-901

Diglycidyl ether of Bisphenol-A

Brand:NanYa
Epoxy Equivalent Weight (g/eq): 450~500
Color (Gardner):1.0max
Flash Point (℃):200↑
Softening point ( 25 ℃):64~74
Solution viscosity ( at 25 ℃):D~F
Density (g/cm3 25℃):1.18

NPSN-136X80 Epoxy Resin

NPSN-901X75

Diglycidyl ether of Bisphenol-A ( 75% ) + Xylene ( 25% )

Brand:NanYa
Physical State:Liquid
Epoxy Equivalent Weight (g/eq): 450~500
Color (Gardner):1.0max
Viscosity (cps,at 25 ℃):8000~15000
Non-volatility (%):74~76
Density (g/cm3 25℃):1.10

NPSN-136X80 Epoxy Resin

NPEB-400

Brominated Epoxy Resin / Flame-Retardant Epoxy Resin

Brand:NanYa
Physical State:Solid
Epoxy Equivalent Weight (g/eq):380~410
Soften point:64~74 ℃
Hydrolyzable chlorine(PPM):200 max
Br content:46~50%
Color (Gardner):1.0max

LOCTITE FREKOTE 770-NC

Semi-Permanent Mold Release Agent / Multi-Release Mold Release Coating

Brand: Henkel
Technology:Mold Release
Appearance:Clear, colorless
Chemical Type:Solvent Based Polymer
Odor:Solvent
Cure:Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:15 to 60 °C

LOCTITE FREKOTE WOLO

Wipe-On Mold Release Agent / Semi-Permanent Mold Release Coating

Brand: Henkel
Technology:Mold Release
Appearance:Clear, colorlessLMS
Chemical Type:Solvent Based Polymer
Odor:Hydrocarbon
Cure:Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:13 to 41 °C

NPSN-136X80 Epoxy Resin

NPPN-638S

Phenolic novolac epoxy resin

Brand:NanYa
Physical State:Semi Solid
Epoxy Equivalent Weight (g/eq):170~190
Color (Gardner):3.0max
Solution viscosity *(25℃):H~J

NPSN-136X80 Epoxy Resin

NPEF-170

o-Cresol epoxy resin

Brand:NanYa
Physical State:Liquid
Epoxy Equivalent Weight (g/eq):160~180
Color (Gardner):3.0max
Flash Point (℃):150↑
Viscosity (cps,at 25 ℃):2000~5000
Density (g/cm3 25℃):1.16

NPSN-136X80 Epoxy Resin

NPSN-136X80 Epoxy Resin

o-Cresol epoxy resin

Brand:NanYa
Physical State:Liquid
Epoxy Equivalent Weight (g/eq):300~330
Color (Gardner):1.0max
Viscosity (cps,at 25 ℃):3000~7000
N.V (%):79~81

Additive OF

PU Moisture Scavenger / Polyurethane Water Scavenger

Brand:BORCHERS
Appearance:Clear colorless liquid
Density:0.89 g/cm3
Color:APHA: Max. 20,ISO 6271

Efka PU 4010 pigment dispersant

EFKA FA 4609

Acidic Polymeric Dispersant / TiO₂ & Inorganic Pigment Dispersant

Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage:Efka® FA 4609 should be stored in tightly closed containers and in a cool place. Mix well before use. In case of separation or turbidity heat-up to 30 – 40 °C and stir.

Efka PU 4010 pigment dispersant

EFKA FA 4608

TiO₂ Dispersant / Low-Molecular-Weight Wetting & Dispersing Agent

Brand:BASF
Physical form:clear to slightly hazy brownish liquid
Storage:Efka® FA 4608 should be stored in a cool dry place. Storage at temperatures below 10 °C (50 °F) may lead to partial solidification. Reliquefy by heating contents to 35 – 40 C (95 –102 °F).

Efka PU 4010 pigment dispersant

EFKA PU 4063

Polyurethane Pigment Dispersant / High-Molecular-Weight Dispersing Agent

Brand:BASF
Physical form:yellowish liquid
Storage:Efka® PU 4063 should be stored in a cool and dry place.

Efka PU 4010 pigment dispersant

EFKA PU 4010

Polyurethane Dispersant / High-Molecular-Weight Pigment Dispersant

Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage:Efka® PU 4010 may partially solidify when stored below 10 °C (50 °F). Heat to 35–40 °C (95–104 °F) to reliquify.

Efka PU 4010 pigment dispersant

EFKA FA 4611

Acidic Dispersing Agent / TiO₂ Wetting & Dispersing Agent

Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage:Efka® FA 4611 should be stored in tightly closed containers and in a cool place. Mix well before use. If separation or turbidity is observed, heat product to 30–40°C and homogenize by stirring.

Efka PU 4010 pigment dispersant

EFKA PA 4401

Polyacrylate Dispersant / High-Molecular-Weight Pigment Dispersant

Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage:Efka® PA 4401 should be kept in a cool and dry place.

Efka PU 4010 pigment dispersant

IRGANOX 1010

Hindered Phenolic Antioxidant / Primary Antioxidant

Brand:BASF
Product family: Antioxidant / Polymer Stabilizer
Product type: Primary phenolic antioxidant
Chemical name: Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate)
CAS number: 6683-19-8
Physical form: White free-flowing powder
Molecular weight: ~1,178 g/mol
Melting range: 110–125°C
Key features: Non-discoloring, low volatility, high extraction resistance, odorless performance
Main applications: Polyolefins, polyamides, polyesters, polyurethanes, PVC, ABS, elastomers, adhesives, tackifier resins, coatings

SWANCOR CP95 concrete lining primer

SWANCOR CP95

Concrete Lining Primer / FRP Concrete Adhesion Primer

Brand:SWANCOR
Appearance :amber, clear liquid
Viscosity :100-300 cps
Gel time :15~35 min.
Shelf life :6 months

Efka PU 4010 pigment dispersant

Baxxodur EC 301

Epoxy Hardener / Low-Color Epoxy Curing Agent

Brand:BASF
Appearance:colorless
Aahew g/eq:60
Density 25 ℃g/ml(±0.01):0.948
Melt point ℃: –
Color PT-Co APHA(max) :25
Viscosity cst 25℃: 9.5

SWANCOR CP95 concrete lining primer

SWANCOR CHEMPULSE 907

Novolac Epoxy Vinyl Ester Resin / High-Temperature Corrosion-Resistant VE Resin

Brand:SWANCOR
Appearance: Clear yellowish liquid
Solid Content(%):67 ± 1
Specific Gravity:1.10 ± 0.02
Gel Time (min):20-30
Shelf Life(months):6(25℃)

Efka PU 4010 pigment dispersant

Irgafos 168

Phosphite Antioxidant / Secondary Processing Antioxidant

Brand: BASF
Chemical name:  Tris(2,4-di-tert.-butylphenyl)phosphite
CAS number: 31570-04-4
Molecular weight 646.9 g/mol

SWANCOR 901-200

Phosphite Antioxidant / Secondary Antioxidant

Brand:SWANCOR
Appearance: Clear Amber Liquid
Solid Content (%):54~56
Viscosity (cps) *1:150~250
Gel Time (min) *2:15~25*2
Shelf Life (months/25oC):6

SWANCOR CHEMPULSE 901

Bisphenol A Epoxy Vinyl Ester Resin / Corrosion-Resistant VE Resin

Brand:SWANCOR
Appearance: Clear yellowish liquid
Solid Content(%):55±1
Viscosity (cps) *1:350±100
Specific Gravity:1.04±0.01
Gel Time (min):15~25*²
Shelf Life(months):9(25℃)

Palapreg H 870-901

PVAc additive intended for improving stiffness and strength SMC / BMC

Brand: AOC
Appreance: Clear-Hazy
Viscosity @23℃: 1800-2200 mPa.s
Solids content: 38-42 %
Acid Value: 2-4 mgKOH/g

Get a Quick Quote

Fill out the form below and we will contact you shortly.