Brand: EVONIK
carbon content：0.7 – 1.3%
loss on drying*2 hours at 105 °C：≤0.5 %
pH value in 4% dispersion:3.7 – 4.7
SiO2 content：>99.8 %
specific surfacearea(BET):150 – 190 m²/g
Brand: EVONIK
carbon content：0.6 – 1.2%
losson drying：<0.5 %
pH value:3.6 – 5.5
SiO2 content：>99.8 %
specific surfacearea(BET):90 – 130 m²/g
tamped density:Approx.50 g/l
Brand: EVONIK
carbon content：2.0 – 3.0 %
losson drying：<0.5 %
pH value:5.5 – 8.0
SiO2 content：>99.8 %
specific surfacearea(BET):230 – 290 m²/g
tamped density:Approx. 60 g/l
Brand: EVONIK
carbon content：3.5 – 5.0 %
losson drying：<0.5 %
pH value:4.0 – 6.0
SiO2 content：>99.8 %
specific surfacearea(BET):80 – 120 m²/g
tamped density:Approx. 60 g/l
Brand: EVONIK
carbon content：1.5 – 3.0 %
delivery form：free-flowing powder
losson drying：max. 0.5 %
pH value, 5%in water:≥ 3.7
specific surfacearea(BET):220 – 280m²/g
tamped density:Approx. 50 g/l
Brand: EVONIK
losson drying：<2.0 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):350 – 410 m²/g
tamped density:Approx. 50 g/l
Brand: EVONIK
losson drying：<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):270 – 330 m²/g
tamped density:Approx. 50 g/l
Brand: EVONIK
losson drying：<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 50 g/l
Brand:Deawa
Appearance: Clear liquid
Odor: Hydrocarbon
Solvent: Polysiloxane/Fluororesin/hydrocarbon
Relative Density: 0.732 (+/-0.02)
Flash Point: 26℃
Shelf Life: 1 year
Cured Thermal Stability: ≤ 330℃（≤626°F）
Application Temperature: 13 to 135℃（55 to 275°F）
Brand: AOC
Geltime at 25℃ (2ml Butanox M50):10-16 minutes
Peak temperature: 175-190 ℃
Viscosity at 25℃ (#4, rpm2): 30000-36000 mPa.s
Viscosity at 25℃ (#4, rpm20): 4000-5500 mPa.s
Brand: Ineos
Properties at 23 °C
Viscosity, Brookfield RV5, 10 rpm: 7000 mPas ISO 2555
Viscosity, cone&plate: 250 mPas ISO 2884
Geltime, 2% MEKP-50: 7 min ASTM D2471
Brand: INEOS
Properties at 23 °C
Viscosity, Brookfield RV5, 10 rpm: 7000 mPas ISO 2555
Viscosity, cone&plate: 250 mPas ISO 2884
Geltime, 2% MEKP-50: 7 min ASTM D2471
Brand:Deawa
Appearance: Clear liquid
Odor: Hydrocarbon odor
Solvent: Aliphatic hydrocarbons
Specific gravity: 0.760±0.010
Thermal stability after curing: 400°C
Brand: AOC
Appearance: Hazy
Viscosity, 23℃: 620-680 mPa.s
Viscosity, 23℃: 590-630 mPa.s
Viscosity, 23℃: 530-560 mPa.s
Solids content, IR: 68-71 % TM 2033
Gel time 25 to 35℃: 38-42 min
Brand: AOC
Appearance: Clear
Solids content, IR drying: 60-66 %
Viscosity @23℃: 300-500 mPa.s
Gel_Time (25 until 35 °C): 18-30 min
Brand: AOC
Appearance: Hazy – TM 2265
Solids content, IR drying: 48-53 %
Viscosity @23℃” 400-500 mPa.s
Gel time(25℃ to 35 °C) : 35-55 min
Appearance：Clear
Solids content, IR drying：64-68%
Viscosity @23℃：400-550
Gel_Time (25 until 35 °C)：12-25 min
Brand: AOC
Appearance: Clear
Solids content: 59.0-65.0 %
Viscosity, 23℃: 400-550 mPa.s
Gel time (25 until 35 ℃): 10-17 min
Brand: AOC
Appreance: Clear
Viscosity @23℃: 1300-1600 mPa.s
Solids content: 59-63 %
Gel time 80-140°C: 70-110 s
Brand: AOC
Appearance: Yellow and hazy
Solids content: 52.0-58.0 %
Viscosity, 23℃: 400-500 mPa.s
Gel time (25 until 35 ℃): 33-43 min
Brand: AOC
Product family: Vinyl Ester Resin
Product type: Marine-Grade Vinyl Ester Resin
Application methods: Hand lay-up and spray-up
Curing system: MEK peroxide (MEKP) curing system
Certifications: Lloyd’s Register and RINA
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity @23℃:450-550 mPa.
Gel time at 25 ℃: Typical Value Base Gelcoat Brush：12-20min;Typical Value Base Gelcoat Spray:8-16 min
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value
Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
