Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Clear liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Humidity
Application: Bonding
Key Substrates：Rubbers, Plastics and Metals
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Elastomers
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Low
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：High
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium to High
Brand: Henkel
Technology：Mold Release
Appearance：Clear, colorless
Chemical Type：Solvent Based Polymer
Odor：Solvent
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Release Coatings
Application Temperature：15 to 60 °C
Brand: Henkel
Technology：Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Hydrocarbon
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Release Coatings
Application Temperature：13 to 41 °C
Brand:NanYa
Physical State：Liquid
Epoxy Equivalent Weight (g/eq)：160～180
Color (Gardner)：3.0max
Flash Point (℃):150↑
Viscosity (cps，at 25 ℃):2000～5000
Density (g/cm3 25℃):1.16
Brand:NanYa
Physical State：Liquid
Epoxy Equivalent Weight (g/eq)：300～330
Color (Gardner)：1.0max
Viscosity (cps，at 25 ℃):3000～7000
N.V (%):79～81
Brand:BORCHERS
Appearance：Clear colorless liquid
Density：0.89 g/cm3
Color：APHA: Max. 20,ISO 6271
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® FA 4609 should be stored in tightly closed containers and in a cool place. Mix well before use. In case of separation or turbidity heat-up to 30 – 40 °C and stir.
Brand:BASF
Physical form:clear to slightly hazy brownish liquid
Storage：Efka® FA 4608 should be stored in a cool dry place. Storage at temperatures below 10 °C (50 °F) may lead to partial solidification. Reliquefy by heating contents to 35 – 40 C (95 –102 °F).
Brand:BASF
Physical form:yellowish liquid
Storage：Efka® PU 4063 should be stored in a cool and dry place.
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® PU 4010 may partially solidify when stored below 10 °C (50 °F). Heat to 35–40 °C (95–104 °F) to reliquify.
Brand: BASF
Chemical name: Tris(2,4-di-tert.-butylphenyl)phosphite
CAS number: 31570-04-4
Molecular weight 646.9 g/mol
Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):35000-60000 mPa.s
Viscosity at 25℃ (#4, rpm20):5700-7300 mPa.s
Geltime at 25℃: 12-18 min
Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand:Polylite
Appearance:Transparent, water-white liquid with a bluish tint
Viscosity:0.75-1.25 25℃, Pa.S
Gel Time:5.6-10.4 25℃, min
Acid Value:18-26 mg KOH/g
Solid Content:64-70 %
Brand:Polylite
Appearance:Light yellow transparent viscous liquid
Acid Value:14-20mgKOH/g
Viscosity，25℃:0.14-0.16Pa.s
Solid Content:52-58%
Gel time:25-38min
Brand:Polylite
Appearance: Light yellow ransparent viscous liquid
Acid Value: 19-25mgKOH/g
Viscosity，25℃: 0.30-0.60Pa.s
Solid Content: 59-65%
Gelation time,25℃: 6-18
Brand:Polylite
Appearance:Yellowish transparent viscous liquid
Acid Value:14-20 mgKOH/g
Viscosity，25℃:0.35-0.45 Pa.s
Solid Content:61-67 %
Thermal Stability,80℃:≥24 h
Gel Time:4-6 min
Brand:Polylite
Appearance:Yellowish transparent viscous liquid
Acid Value:14-20 mgKOH/g
Viscosity，25℃:0.65-0.75 Pa.s
Solid Content:63-69 %
Thermal Stability,80℃:≥24 h
Gel Time:4.5-9.5 min
