AEROSIL R 812

AEROSIL® R 106

Brand: EVONIK
carbon content:1.5 – 3.0 %
delivery form:free-flowing powder
losson drying:max. 0.5 %
pH value, 5%in water:≥ 3.7
specific surfacearea(BET):220 – 280m²/g
tamped density:Approx. 50 g/l

AEROSIL R 812

AEROSIL® 300

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):270 – 330 m²/g
tamped density:Approx. 50 g/l

AEROSIL R 812

AEROSIL® 200

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 50 g/l

Ketjenblack EC-600JD

Brand:Nouryon
Apparent bulk density:100-120 kg/m³
Appearance:Black free-flowing pellets
Ash:≤0.1 %
Fines <125 micron: ≤7 %
Grit content: ≤30 mg/kg
Iodine absorption :1000-1100 mg/g
Moisture: ≤0.5 %
pH: 9.0-10.5
Pore volume, DBP: 480-510 ml/100g
Volatiles: ≤1.0 %

REOLOSIL QS­20LS

Brand:Tokuyama
Specific surface area:200ÿ240 mÿ2ÿ /g
(BET) Bulk density:40 g/L (approximately)
pH (4% suspension):4.2
SiO2 purity (dry basis): > 99.9 %
Cl:< 50 ppmÿ
Al:< 20 ppmÿ
Fe:< 20 ppmÿ
325 mesh coarse: < 0.01 %
grain moisture (loss on drying method, %):< 1.5 %

Dytek® A

Brand:Invista
IUPAC Name:2-methylpentane-1,5-diamine
CAS Number:15520-10-2
Molecular Formula :C6H16N2
Molecular Weight: 116.208 g/mol
Description: Clear low viscosity liquid, free of suspended materials

CAB-O-SIL® M-5

Brand:Cabot
B.E.T. Surface Area:200 m2/g
pH (4% aqueous slurry): 3.7 – 4.3
325 Mesh Residue (44 microns): 0.02% max.
Tamped Density: 50 g/l
Loss on Heating*: < 1.5%
Specific Gravity :2.2 g/cm3
Wt. per gallon: 18.3 lb

Desmodur® N 3390 BA

Brand: COVESTRO
NCO content:19.6 ± 0.3 %
Non-volatile content2.2 g / 120 min / 100 °C:90 ± 1 %
Viscosity (23 °C):500 ± 150 mPa·s
Color value (Iod):≤ 40
Monomeric HDI:< 0.15%

Desmodur® L 75

Brand: COVESTRO
NCO content:13.3 ± 0.4 %
Non-volatile content2.2 g / 120 min / 100 °C:75 ± 1 %
Viscosity (23 °C):250 ± 75 mPa·s
Color value (Iod):≤ 40
Monomeric content:< 0.38%

Desmodur® N75 MPA/X

Brand: COVESTRO
NCO content:16.5 ± 0.3 %
Non-volatile content2.2 g / 120 min / 100 °C:75 ± 1 %
Viscosity (23 °C):250 ± 75 mPa·s
Color value (Iod):≤ 40
Monomeric content:< 0.38%

AEROSIL R 812

AEROSIL® 200 HV

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 50 g/l

Desmodur® E 15

Brand: COVESTRO
NCO content:4.4 ± 0.2 %
Viscosity (23 °C):7000 ± 1000 mPa·s
Monomeric HDI:< 0.5%

AEROSIL R 812

AEROSIL® 200 V

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 120 g/l

AEROSIL R 812

AEROSIL® 200 F

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 50 g/l

Basisil®- 200

Brand: BASHAN
Specific Surface Area BET(m²/g):200±15
pH Value in 4% dispersion:3.8~4.2
Loss on Drying 2h@ 105℃(%):≤1.5
Loss on Ignition 2h@ 1000℃(%):≤2.0
Sieve Residue 45μm(%):≤0.05
Bulk Density (g/l):40~60
SiO2Content(%):≥99.8

AEROSIL R 812

VESTAMIN IPD

Brand: EVONIK
Molecular weight C10H22N2:170.3g/mol
Equivalent weight:85.2g/val
H-active equipment weight:42.6g/val
Density at 20℃:0.820-0.925gcm3

TT-K196

Brand:Thousands Technology
Appearance: Light yellow transparent liquid
Viscosity(25℃,Pa·s):0.25-0.45
Gel time(25℃,min):9-17
Acid value(mgKOH/g):28-36
Solid content(%):61-67

TT-RP-126 promoter

Brand:Thousands Technology
Appearance: clear cyan purple liquid
Resin casting body color: light color , light blue, vivid color

TT-Promoter E

Brand:Thousands Technology
Appearance: clear purple liquid
Gel time (25 ℃):≤ 5 min
Density (25 ℃): 0.900-0.922g / min
Resin casting body color: original color

TT-Accelerator D

Brand:Thousands Technology
Appearance: clear purple liquid
Resin casting body color: original resin color

Synolite 8175-W-1

Neobond® VE 6100-W-1

Brand: AOC
Appearance: Beige
Viscosity1) @23℃:1200-2000 mPa.s
Gel time, 200g paste cured with 2% M50,23℃:55-65 minutes
Gel_Time2) (25℃ until 35℃):38-41 minutes
Curel_Time2) (25℃-peak):51-61 minutes

TT-Promoter A2

Brand:Thousands Technology
Appearance: clear purple liquid
Gel time(25℃)≤5min
Density(25℃):0.900-0.922g/min
Color of resin casting body: reveal original resin color

Synolite 8175-W-1

PALATAL® A400-972

Brand: AOC
Appearance: clear
Viscosity @23℃:400-550 mPa.s
Solids content, IR drying:55-61%
Acid value:8-14 mgKOH/g
Gel time(25℃to35 °C):15-25 min

TT-MIBKP-H

Brand:Thousands Technology
Appearance: Clear liquid
Color:≤50 Pt-Co
Total active oxygen:10.0-10.3 %
Density:0.99 g/cm³
Viscosity, 20 °C:12 mPa.s

Get a Quick Quote

Fill out the form below and we will contact you shortly.