Brand:Thousands Technology
Appearance: White high viscous paste
Assay:44.0-46.0 %
Brand:Thousands Technology
Appearance: Yellow viscous liquid
Amine value (mgKOH/g): 600–630
Color (Gardner): ≤ 6
Viscosity (25 °C, mPa·s): 100–300
Brand:Thousands Technology
Appearance: colorless transparent liquid
Epoxy Equivalent Weight(g/eq):0.32
Viscosity(cps/25℃) 5-15mpas
Organic Chlorine（EQ/100g）:≤0.02
Inorganic Chlorine （EQ/100g）：≤0.005
Moisture Content(%):≤0.1
Brand:Thousands Technology
Appearance：light yellow liquid
Viscosity(25 °C): 20-80mPa.s
Acid value:660min mgKOH/g
Free acid:0.5max%
Product family: Hot Melt Adhesive
Product type: Pressure Sensitive Adhesive (PSA)
Grade: TECHNOMELT® PS 1573 E
Adhesive technology: Hot melt pressure sensitive adhesive
Substrate compatibility: Paper labels, film labels and low surface energy substrates
Key features: Moderate adhesion across various substrates, good initial tack, good low-temperature toughness, suitable for both paper and film labels
Brand: Henkel
Chemical Type: Epoxy
Appearance (Resin):Off-whiteLMS
Appearance (Hardener):greenLMS
Appearance (Mixture):Off-whiteLMS
Components:Two part – Resin & Hardener
Mix Ratio, by weight -Resin : Hardener:100:4
Mix Ratio, (by volume)Resin : Hardener:2.5:1
Cure:Room temperature cure after mixing
Brand: Henkel
Chemical Type: Epoxy
Appearance (Mixed):Steel Colored Paste
Mix Ratio, by volume -Resin : Hardener|：1:1
Mix Ratio, by weight -Resin : Hardener：100 : 56.5
Cure:Room temperature cure after mixing
Application：North America – Metal Repair
Specific Benefit：
● Hardens in ten minutes
● Non sagging
● Steel filled system – cures to metal-like finish
● Bonds to steel, cast iron,stainless steel, concrete,copper, aluminum, and clean and abraded bronze
Brand: Henkel
Technology:Epoxy Resin
Additional Information:2-component solvent free toughend epoxy resin
Product type: Two-component epoxy structural adhesive
Grade: TEROSON® EP 5055
Chemical nature: Epoxy resin (Part A) + amine hardener (Part B)
Mixing ratio A:B: 1:1 by volume
Brand: Henkel
Technology:Solvent based
Chemical Type:Modified resin, fillers and alcohol
Appearance:Brown liquidLMS
Viscosity:Flow similar to SAE 10 Motor Oil
Cure：Air dry
Application:Gasketing & sealing
Specific Benefits:
● For close tolerance flanges
● Slow drying
● Flexible setting
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 184～190
Color (Gardner) :1.0max
Flash Point (℃) :150↑
Viscosity(cps，at 25 ℃) :12000～15000
Hydrolyzabie chlorine (ppm) :1000↓
Density (g/cm3 25℃) :1.16
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 176～184
Hydrolyzable chlorine（ ppm）:1000↓
Color（Gardner）：0.0~1.0
Viscosity(cps，at 25 ℃) :8000～11000
Brand:NanYa
Epoxy Equivalent Weight (g/eq): 176～184
Hydrolyzable chlorine（ ppm）:300↓
Color（Gardner）：0.0~1.0
Viscosity(cps，at 25 ℃) :8000～11000
Brand:NanYa
Physical State:Semi Solid
Epoxy Equivalent Weight (g/eq):170～190
Color (Gardner)：3.0max
Solution viscosity *(25℃):H～J
Brand:NanYa
Physical State：Liquid
Epoxy Equivalent Weight (g/eq)：160～180
Color (Gardner)：3.0max
Flash Point (℃):150↑
Viscosity (cps，at 25 ℃):2000～5000
Density (g/cm3 25℃):1.16
Brand:NanYa
Physical State：Liquid
Epoxy Equivalent Weight (g/eq)：300～330
Color (Gardner)：1.0max
Viscosity (cps，at 25 ℃):3000～7000
N.V (%):79～81
Brand:BASF
Product family: Antioxidant / Polymer Stabilizer
Product type: Primary phenolic antioxidant
Chemical name: Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate)
CAS number: 6683-19-8
Physical form: White free-flowing powder
Molecular weight: ~1,178 g/mol
Melting range: 110–125°C
Key features: Non-discoloring, low volatility, high extraction resistance, odorless performance
Main applications: Polyolefins, polyamides, polyesters, polyurethanes, PVC, ABS, elastomers, adhesives, tackifier resins, coatings
Brand:SWANCOR
Appearance: Clear yellow liquid
Solid Content(%)：73.5~69.5
Specific Gravity：1.08~1.12 g/cm3
Gel Time (min)：25~35
Shelf Life(months)：6
Brand: SWANCOR®
Product family: Auxiliary Agent
Product type: Resin promoter / accelerator
Grade: SWANCOR 1305
Key features: Controlled curing, good low-temperature performance, humidity resistance
Main applications: FRP resin curing systems
Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand:SWANCOR
Appearance:Brown translucent layered fluid
Gel time：20-30min
Suitable substrate:iron
Bonding strength：ASTMD1002， test rate:5mm/min
Iron:130kg/㎡
Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand: ATLA
Brassard viscosity RV2, 20rpm:1100 mPas
Thixotropic index:2.0
Oxygen index (pure resin- cured body)：35
Thermal deformation temperature (pure resin cured body)：70
Gel time*：50 Minute
