Desmodur L 75: An Aromatic TDI Prepolymer for 2K Coatings and Adhesives
Desmodur L 75 is an aromatic polyisocyanate based on toluene diisocyanate (TDI), supplied at approximately 75% concentration in ethyl acetate. As one of the recommended international brand products in our auxiliary agent range, it is used in combination with Desmophen, Baycoll, Desmocoll, or other hydroxyl-bearing substances to formulate two-component polyurethane coatings and adhesives.

Applications
Systems crosslinked with Desmodur L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics, and mineral substrates. It is also suitable for room-temperature crosslinking of adhesives based on Desmocoll or Baycoll, which can bond many materials such as wood, metal, and plastic. Using this polyisocyanate increases the resistance of the bonds to heat, oil, plasticizers, and many solvents, and it provides good adhesion to many materials, especially plastics. The pale inherent color of Desmodur L 75 also permits its use in bonding transparent plastic films for packaging.
Specification
- NCO content: 13.3 ± 0.4% (ISO 11909)
- Non-volatile content: 75.0 ± 2.0% (ISO 3251)
- Viscosity at 23°C: 1,600 ± 400 mPa·s (ISO 3219/A.3)
- Color (Iodine): ≤ 2 (EN 1557)
- Monomer content: less than 0.5% (ISO 10283)
Typical values for Desmodur L 75 also include an equivalent weight of approximately 315, a flash point of approximately 5°C, and a density at 20°C of approximately 1.17 g/ml. These typical values are not binding specifications and buyers should confirm current data against the manufacturer’s technical data sheet before finalizing a formulation.
Solubility and Compatibility
In general, Desmodur L 75 has good compatibility with esters such as ethyl acetate, butyl acetate, and 1-methoxypropylacetate-2, and aromatic hydrocarbons such as toluene, xylene, and Solvesso 100, though the solutions formed must be tested for storage stability. The product is not compatible with aliphatics, and alcohols react with it and therefore cannot be used. Prolonged storage of a solution with low binder content may result in turbidity and sedimentation. Only PU-grade solvents should be used (less than 0.05% water), and the solvent should not contain reactive groups. In general, this hardener is compatible with many polyesters, polyethers, and polyacrylates, as well as with other Desmodur grades. For buyers building out a broader auxiliary agent and additive program, our technical team can help confirm solvent and co-reactant selection for your specific system.
Storage Guidance
This hardener should be stored in its original sealed container at a recommended temperature of 10-30°C, protected from moisture, heat, and foreign material. Storage at higher temperatures will result in an increase of color and viscosity, while storage at significantly lower temperatures will result in solidification; this solidification is reversible by briefly heating the product without adversely affecting quality. Under proper storage conditions, the product is expected to meet its specifications for six months from the date of shipment.
Sourcing Considerations for Coating and Adhesive Formulators
Buyers should confirm co-reactant selection, cure schedule, and substrate compatibility against their own formulation before scaling up production, since isocyanate-based systems require careful moisture control during processing. For plastics and composites testing standards referenced across the coatings industry, see the ASTM D20 committee on plastics.
Frequently Asked Questions About Desmodur L 75
What type of product is Desmodur L 75?
It is an aromatic polyisocyanate based on toluene diisocyanate, supplied at approximately 75% concentration in ethyl acetate for two-component polyurethane coatings and adhesives.
Can it be used in adhesive applications?
Yes, it is suitable for room-temperature crosslinking of adhesives based on Desmocoll or Baycoll, bonding wood, metal, and plastic with increased resistance to heat and solvents.
What is the NCO content of this prepolymer?
The NCO content is 13.3 ± 0.4% per ISO 11909, with a viscosity of 1,600 ± 400 mPa·s at 23°C.
Can alcohols be used as a solvent with this product?
No, alcohols react with Desmodur L 75 and cannot be used. Only PU-grade solvents with low water content and no reactive groups should be used.
Is Desmodur L 75 available for bulk purchase?
Yes, our team can provide technical documentation and supply chain resource support for buyers sourcing this product in trial quantities or larger production volumes.
Request a Quote for Desmodur L 75
If your formulation requires an aromatic TDI polyisocyanate for two-component coatings or adhesives, contact our team with your target co-reactant system and application method. We can help confirm whether this hardener fits your process and provide supporting technical documentation and supply chain resource support.