Chemical family：Ethylene Amines
CAS number：111-41-1
Physical form：Liquid
Molecular Weight：104.15
Chemical name：2-(2-aminoethylamino)ethanol
Appearance：Clear
Solids content, IR drying：64-68%
Viscosity @23℃：400-550
Gel_Time (25 until 35 °C)：12-25 min
True high-gloss paste wax.
Withstands high-temperature exothermic reactions of resins and does multiple releases easily.
Contains carnauba wax, synthetic waxes and high-temperature resistant resins for effective multiple releases of plastic parts through numerous cycles.
Brand: AOC
Appearance: Clear
Solids content: 59.0-65.0 %
Viscosity, 23℃: 400-550 mPa.s
Gel time (25 until 35 ℃): 10-17 min
Brand: AOC
Appreance: Clear
Viscosity @23℃: 1300-1600 mPa.s
Solids content: 59-63 %
Gel time 80-140°C: 70-110 s
Brand: AOC
Appearance: Yellow and hazy
Solids content: 52.0-58.0 %
Viscosity, 23℃: 400-500 mPa.s
Gel time (25 until 35 ℃): 33-43 min
Brand: AOC
Product family: Vinyl Ester Resin
Product type: Marine-Grade Vinyl Ester Resin
Application methods: Hand lay-up and spray-up
Curing system: MEK peroxide (MEKP) curing system
Certifications: Lloyd’s Register and RINA
Brand: AOC
Appearance: Clear
Solids content: 67 – 71 %
Viscosity @23℃:450-550 mPa.s
Gel time (25 until 35 ℃): 28-38min
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity @23℃:450-550 mPa.
Gel time at 25 ℃: Typical Value Base Gelcoat Brush：12-20min;Typical Value Base Gelcoat Spray:8-16 min
Brand:Dissolvine®
Chemical family:Chelate
CAS number:51981-21-6
Physical form:Liquid
Molecular Weight:351.1
Chemical name:Glutamic acid, N,N-diacetic acid, tetra sodium salt
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value
Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Bagging films, primarily used in vacuum bagging processes for composite manufacturing, are essential for creating a sealed environment and applying controlled pressure to consolidate materials during curing. These films offer various properties like high strength, puncture resistance, flexibility, and temperature resistance, ensuring a quality part.
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value
Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Peel Ply is a fabric layer placed on the surface of a composite laminate which can be removed after curing of the composite to leave a textured surface on the surface of the laminate.
Breathers and bleeders are auxiliary materials used in composite molding to remove air and excess resin, ensuring vacuum integrity and product quality.
Sealant Tape is typically used whenever an air tight seal is required and will adhere to most surfaces. It is most commonly used in the composite manufacturing process of temporary as well as permanent vacuum bagging.
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Brand: AOC
Appearance: pink thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：50000-80000mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：10000-13000mPa.s);（Typical Value Base Gelcoat Spray：7500-9500mPa.s)
Gel time at 25 ℃: (Typical Value Base Gelcoat Brush：12-20min);(Typical Value Base Gelcoat Spray:8-16 min)
Release film ensures that breather fabric or flow mesh does not bond to the curing resin. By use of various perforation patterns, the amount of resin that is bled out of the laminate can be controlled, to achieve the correct fiber ratio within the composite.
Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：26000-45000 mPa.s);（Typical Value Base Gelcoat Spray：22000-40000 mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：6500-10000 mPa.s);（Typical Value Base Gelcoat Spray：3500-5000 mPa.s)
Gel time at 25 ℃: 10-20 min
Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：26000-45000 mPa.s);（Typical Value Base Gelcoat Spray：22000-40000 mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：6500-10000 mPa.s);（Typical Value Base Gelcoat Spray：3500-5000 mPa.s)
Gel time at 25 ℃: 10-20 min
