Boat builders and FRP fabricators working on marine and construction projects that require long-term water and weather resistance often look at Neogel 8373-W-9742 gelcoat as a pre-accelerated, ready-to-use option available in a wide range of colours. This article covers what is documented about this gelcoat on its product page, the version types available, recommended processing conditions, and what buyers should confirm before ordering.
What Is Neogel 8373-W-9742 Gelcoat?
This gelcoat is an iso/Neopentylglycol gelcoat formulated for easy application. According to its product documentation, it combines several characteristics relevant to marine and construction FRP work: good resistance to long immersion in water (described as good blister resistance), excellent weatherability with less yellowing, good air release, and good mechanical properties.
Key Performance Characteristics of Neogel 8373-W-9742 Gelcoat
Water Immersion and Blister Resistance
The product documentation describes good resistance to long immersion in water, which is relevant for hulls, pools, and other structures that stay in contact with water for extended periods, along with good blister resistance to reduce surface defects over time.
Weatherability and Air Release
Excellent weatherability, described as less yellowing, supports color retention on outdoor and marine structures exposed to sunlight. Good air release is also noted, which helps reduce trapped air and pinholes during application.
Certifications and Compliance
Neogel 8373-W-9742 gelcoat is documented as conforming to USA ANSI-Z-124-1 and approved by DNV Italia and Italian RINA, two recognized marine classification societies, which buyers can reference when confirming compliance requirements for a given project.
Neogel 8373-W-9742 Gelcoat Product Types and Application Methods
The product is pre-accelerated and thixotropic, supplied ready for use, and is documented as available in the following types:
Spray Type and Recommended Equipment Settings
The spray type (Neogel 8373-W-9742) can be applied with conventional spray equipment. Documented settings include a spray gun with a nozzle diameter of 2.0-3.5 mm at 4-5 bar pressure, or airless equipment with nozzle types 18/40-21/40.
Brush Type for Touch-Ups and Small Parts
A brush type version (Neogel 8373-W-9742 H) is also available, suited to manual application. Both spray and brush types can also be supplied in paraffinated versions on request.
Paraffinated Versions for Open-Air Curing
The paraffinated spray and brush options are intended for situations where the gelcoat needs to cure in open air, since the paraffin film in the finish reduces surface tackiness during cure.
Processing Guidelines for Neogel 8373-W-9742 Gelcoat
According to the product documentation, optimum performance is achieved by applying Neogel 8373-W-9742 gelcoat at a temperature between 18°C and 25°C, curing with a recommended MEKP 50% solution at 1.0-2.5% dosage, and building a film thickness of 600-800 g/m². The documentation references Butanox M50 from Akzo Nobel, a recommended international brand product, as the reference catalyst for this cure schedule.
Sourcing Neogel 8373-W-9742 Gelcoat
This product is available in standard drum and pail packaging, with both bulk orders and samples supported and global shipping arranged based on destination. A Certificate of Analysis (COA) and Safety Data Sheet (MSDS) are available on request for each batch. Buyers should confirm current lead time directly, since it depends on order quantity and production schedule at the time of inquiry. Buyers can also review our broader resin catalog when comparing gelcoat and resin options for the same project.
Frequently Asked Questions
What type of gelcoat is Neogel 8373-W-9742?
It is an iso/Neopentylglycol gelcoat, pre-accelerated and thixotropic, available in spray and brush types for marine, construction, and paints and coatings applications.
How do I choose between spray and brush versions of Neogel 8373-W-9742 gelcoat?
The spray type is suited to large surface areas and production runs using spray or airless equipment, while the brush type is designed for touch-ups, small parts, or manual application where spray equipment is not practical.
What catalyst dosage is recommended for Neogel 8373-W-9742 gelcoat?
The documentation recommends curing with a MEKP 50% solution such as Butanox M50, at a dosage between 1.0% and 2.5%, applied within a film thickness of 600-800 g/m².
Is it certified for marine use?
It is documented as conforming to USA ANSI-Z-124-1 and approved by DNV Italia and Italian RINA, both recognized marine classification societies.
Can I get a COA and MSDS for it?
Yes, a Certificate of Analysis and Safety Data Sheet are available on request for each batch.
ChemicalsStore.com operates as a one-stop sourcing platform for composite manufacturers, offering sourcing support, technical documentation, and responsive customer service for buyers evaluating Neogel 8373-W-9742 gelcoat alongside other resin, gelcoat, and auxiliary agent products.
Explore our product page: Neogel 8373-W-9742
You may also be interested in: our Resin catalog, and marine classification background from DNV
Send us your target application method and film thickness requirements at info@chemicalsstore.com, and we’ll help you confirm stock and get a quote.
