Desmodur HL BA

Desmodur HL BA is an aromatic/aliphatic polyisocyanate hardener based on toluylene diisocyanate (TDI) and hexamethylene diisocyanate (HDI), formulated to produce clear or pigmented two-component polyurethane coatings with rapid drying and good lightfastness. For composite and wood coating buyers, Desmodur HL BA offers a practical balance of fast cure speed and workable film properties that supports efficient finishing lines.

Desmodur HL BA polyisocyanate hardener

Key Technical Properties of Desmodur HL BA

According to Covestro technical data, Desmodur HL BA has an NCO content of 10.5 ± 0.5%, tested to DIN EN ISO 11909, and a viscosity at 23°C of 2,200 ± 1,000 mPa·s, measured per DIN EN ISO 3219/A.3. Non-volatile content is 60.0 ± 2.0%, density at 20°C is approximately 1.13 g/ml, and the equivalent weight is 400. These figures let formulators calculate mixing ratios and predict film build before committing to a production batch.

  • NCO content: 10.5 ± 0.5%
  • Viscosity at 23°C: 2,200 ± 1,000 mPa·s
  • Non-volatile content: 60.0 ± 2.0%
  • Density at 20°C: approx. 1.13 g/ml
  • Equivalent weight: 400

Solubility and Compatibility of Desmodur HL BA

Desmodur HL BA has good compatibility with a defined range of solvents, though any blended solution should be tested for storage stability before scale-up. It can be thinned with ethyl acetate, butyl acetate, and 1-methoxypropylacetate-2. Aromatic solvents are not true diluents and offer only limited compatibility, and prolonged storage of a low-binder-content solution may lead to turbidity or sedimentation.

Only PU-grade solvents with less than 0.05% water content should be used, and the solvent should not contain reactive groups. Desmodur HL BA is compatible with many Desmophen polyester grades and with standard Desmodur grades, but it has only limited compatibility with hydroxyl-functional acrylates.

Why Buyers Choose This Effective Hardener for Wood Coatings

The rapid initial drying and early sandability of Desmodur HL BA are particularly valuable when formulating wood coatings. With just a few coats, formulators can achieve high-bodied clear or pigmented finishes, which shortens the time parts spend on the line and reduces the risk of dust settling on a still-tacky surface.

In furniture and wood component production, finishing typically moves through multiple stages such as sanding, additional coats, and packing under a tight schedule.

A hardener that dries quickly and reaches early sandability lets a line advance parts sooner, reducing work-in-progress inventory.

Formulators should always confirm current mixing ratio, pot life, and recommended solvent blend against the latest technical data sheet for their specific coating system before finalizing a purchase order.

Suitability Across Coating Systems

Because Desmodur HL BA pairs with multiple Desmophen polyester grades and standard Desmodur grades, it gives formulators flexibility when building two-component polyurethane systems for clear topcoats, pigmented finishes, and general wood and furniture coatings that require both speed and appearance.

Typical Applications for Desmodur HL BA

this hardener is primarily used in two-component polyurethane coatings for furniture, wood components, and general industrial substrates where fast drying and good lightfastness are required. Thousands Chemicals supplies the product alongside a broader auxiliary agent range for composite and coating formulators sourcing curing and hardening systems.

Sourcing this grade for Important Coating Applications

Thousands Chemicals connects coating formulators and furniture finishers with it and related auxiliary agent products through our digital B2B marketplace, sourced as recommended international brand products through established supply chain resource support. Our team can help confirm packaging, lead times, and technical documentation for your target application and order volume.

FAQ

What is this hardener used for?

It is a polyisocyanate hardener used to formulate fast-drying, two-component polyurethane coatings, commonly applied in furniture and wood finishing where rapid sandability and good lightfastness are required.

What is the NCO content of the product?

this grade has an NCO content of 10.5 ± 0.5%, tested according to DIN EN ISO 11909.

Which solvents can thin it?

this hardener can be thinned with ethyl acetate, butyl acetate, and 1-methoxypropylacetate-2. Aromatic solvents offer only limited compatibility as diluents.

Is the product compatible with polyester polyols?

Yes. this grade is compatible with many Desmophen polyester grades and with standard Desmodur grades, though it has limited compatibility with hydroxyl-functional acrylates.

Can I request documentation for it before ordering?

Yes. Our team can share the technical data sheet and safety documentation for this hardener to support your formulation and purchasing decision.

Ready to source the product for your next coating batch? Contact our team to request pricing, lead times, and technical documentation for your application.

Transportation

To make chemical sourcing more efficient reliable, and intelligent

Our Partners

Packaging & Shipping

Every process of our packaging is very strict
just to betterdeliver the goods to your hands!

Secure Payment

PAYMENT OA,DP,VTB,T/T,Westem Union, MoneyGram, Paypa

Desmodur E 15

Brand: COVESTRO
NCO content:4.4 ± 0.2 %
Viscosity (23 °C):7000 ± 1000 mPa·s
Monomeric HDI:< 0.5%

Desmodur IL 1451 BA

Brand: COVESTRO
Form supplied:approx. 51 % in butyl acetate
NCO content:7.4 ± 0.2 %
Non-volatile content(0.2 g / 60 min / 120°C):51.0 ± 2.0 %
Viscosity (23 °C):250 ± 75 mPa·s
Color value (Iod):≤ 1.0
Monomeric content:< 0.50%

Desmodur L 75

Brand: COVESTRO
NCO content:13.3 ± 0.4 %
Non-volatile content2.2 g / 120 min / 100 °C:75 ± 1 %
Viscosity (23 °C):250 ± 75 mPa·s
Color value (Iod):≤ 40
Monomeric content:< 0.38%

Desmodur IL-1351-BA

Brand: COVESTRO
Form supplied:approx. 51 % in butyl acetate
NCO content:8.0 ± 0.3 %
Non-volatile content(0.2 g / 60 min / 120°C):51.0 ± 2.0 %
Viscosity (23 °C):1,300 ± 450 mPa·s
Color value (Iod):≤ 1.0
Monomeric content:< 0.10%

Desmodur BL 3175 SN

Brand: COVESTRO
Form supplied:approx. 51 % in butyl acetate
NCO content:7.4 ± 0.2 %
Non-volatile content(0.2 g / 60 min / 120°C):51.0 ± 2.0 %
Viscosity (23 °C):250 ± 75 mPa·s
Color value (Iod):≤ 1.0
Monomeric content:< 0.50%

Get a Quote

Get a Quick Quote

Fill out the form below and we will contact you shortly.