Atlac 430S

Atlac 430S Vinyl Ester Resin

Atlac 430S is an AOC vinyl ester resin for composite components used in corrosive environments. The manufacturer’s product data sheet identifies filament winding, centrifugal casting, hand lay-up and spray-up as suitable fabrication methods. The resin can be used with glass or carbon reinforcement. Select the reinforcement and laminate design for the required service conditions.

Atlac 430S

Product Specifications

PropertyValueTest method
AppearanceClearTM 2265
Solids content56–60%TM 2033
Acid value4–8 mg KOH/gTM 2401
Viscosity at 23 °C450–500 mPa·sTM 2013
Gel time (25 to 35 °C)8–14 minTM 2625

The gel-time range is a laboratory result for the test conditions documented in the manufacturer’s PDS. It should be compared only with values obtained under comparable conditions. In production, assess working time with the actual reinforcement, resin batch, part geometry and shop temperature. For test details and the latest revision, request the grade-specific technical data sheet.

Typical Liquid Resin and Cast Resin Properties

PropertyValueTest method
Liquid resin density1,060 kg/m³TM 2160
Liquid resin flash point33 °CTM 2800
Cast resin tensile modulus3.6 GPaISO 527
Cast resin elongation at break6.1%ISO 527
Cast resin flexural strength150 MPaISO 178
Cast resin flexural modulus3.4 GPaISO 178
Cast resin heat deflection temperature105 °CISO 75

The figures for cast resin are typical results for unfilled specimens. They should be kept separate from reinforced laminate properties. The data sheet reports cast resin and glass-reinforced specimens in separate tables and identifies the reinforcement and cure conditions for its laminate results. Use the relevant specimen and method when comparing candidate materials for a project.

Atlac 430S Applications and Material Selection

The manufacturer describes Atlac 430S for chemical-processing environments where parts may be exposed to acids, alkalis or bleaches. Compatibility depends on the exact fluid, concentration, temperature, duration and exposure pattern. Share normal operating conditions and any cleaning cycles, excursions or mixtures with the technical team before specifying the material.

For filament winding, include the reinforcement type, component dimensions and intended resin application method. For centrifugal casting, describe the part and process constraints. For hand lay-up or spray-up, identify the reinforcement, part thickness and production conditions. The manufacturer discusses thixotropy separately in the PDS, including restrictions for certain chemical services. Ask for application-specific guidance before specifying a modified formulation.

For parts that see intermittent heat, review the actual operating cycle with the technical team. A laboratory heat deflection value does not define the maximum service temperature for a finished laminate. Where mechanical performance or chemical resistance is critical, ask for evidence relevant to the intended laminate and qualify a representative specimen.

Storage and Documentation

The PDS lists typical stability of nine months for resin without initiator, stored in the dark at 25 °C. Confirm the remaining shelf life for the specific lot, and use the current SDS and label for storage, handling and transport instructions. For receiving inspection, request a lot certificate if required and distinguish the order acceptance criteria from the typical values in this product overview.

Atlac 430S Quote and TDS Requests

Use the full Atlac 430S grade name when requesting a quote, sample, TDS or SDS. Include the fabrication process, reinforcement, quantity, delivery destination and required date. For corrosion service, include the chemical exposure details and any qualification or documentation requirements. Confirm packaging and lead time at quotation.

Comparing other suffixes? Review the AOC resin range and match each specification to the exact grade designation. The AOC product brand overview provides additional context on the Atlac series. Technical values on this page are based on the manufacturer’s English Atlac 430S PDS, version 2.0.

Transportation

To make chemical sourcing more efficient reliable, and intelligent

Our Partners

Packaging & Shipping

Every process of our packaging is very strict
just to betterdeliver the goods to your hands!

Secure Payment

PAYMENT OA,DP,VTB,T/T,Westem Union, MoneyGram, Paypa

Get a Quote

Get a Quick Quote

Fill out the form below and we will contact you shortly.