Synolite 8388-P-921 S is a low-viscosity, promoted, thixotropic DCPD unsaturated polyester resin from AOC for hand lay-up and spray-up. Fabricators choose Synolite 8388-P-921 S for its proper sticky surface and good secondary adhesion, which make it well suited to repeated hand lay-up. It has medium reactivity, lower styrene content, contains no monomeric amines, and is approved by China Classification Society (CCS) for boat building.
Key Benefits
- Good mechanical properties
- Rapid impregnation speed and good processing
- Good adhesion after secondary lamination
- Low shrinkage
- Suitable for emulsion mat
- CCS certification
Because the resin is supplied promoted, only a peroxide catalyst needs to be added before use.
Synolite 8388-P-921 S Technical Data
Product Specification
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Appearance | Hazy | – | TM 2265 |
| Viscosity @ 23℃ | 210–250 | mPa·s | TM 2013 |
| Solids content (IR drying) | 56–61 | % | TM 2033 |
| Acid value | 15–21 | mg KOH/g | TM 2401 |
| Gel time (25℃ to 35℃) | 40–70 | min | TM 2625 |
Liquid Resin Typical Properties
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Flash point | 33 | ℃ | TM 2800 |
| Stability (no initiator, dark, 25℃) | 6 | months | – |
Unfilled Casting Typical Properties
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Tensile strength | 60 | MPa | ISO 527-2 |
| Tensile modulus | 3.3 | GPa | ISO 527-2 |
| Tensile elongation | 2.0 | % | ISO 527-2 |
| Flexural strength | 130 | MPa | ISO 178 |
| Flexural modulus | 3.6 | GPa | ISO 178 |
| HDT | 75 | ℃ | ISO 75-2 |
| Unnotched impact strength | 8 | kJ/m² | ISO 179 |
Tensile values are measured to ISO 527-2 and flexural values to ISO 178.
Applications of Synolite 8388-P-921 S DCPD Resin
The resin combines good mechanical properties with good processability. It shows very good fiber wetting and impregnation, and its low exotherm allows thick laminates to be made in one go with good through-cure and relatively low shrinkage. Its proper sticky surface makes it especially suitable for repeated hand lay-up, and a color-change system helps operators in spray-up. It can be used with powder- and emulsion-bound mats.
Typical markets are marine (boat building, with CCS approval), leisure products and automotive parts. Pair it with an MEKP catalyst from our organic peroxide range, or compare it with the related grade Synolite 8388-P-1 S.
Processing Guidelines
- Use MEKP as the curing agent at 1%–2.5%, adjusted to the workshop temperature and the process time you need.
- This is a thixotropic resin; stir it gently before use.
- Room-temperature-cured parts should be post-cured for the best properties. Before post-curing, cure parts at room temperature for 24 hours. Leave parts 24–48 hours at room temperature before assembly steps such as drilling.
Storage
Store Synolite 8388-P-921 S in a dark, dry place at 5℃–30℃. Shelf life is reduced at higher temperatures and resin properties may change during storage. Keep it in dark, 100% light-tight containers and avoid direct sunlight. The TDS and SDS are available on request.
Frequently Asked Questions About Synolite 8388-P-921 S
What type of resin is Synolite 8388-P-921 S?
It is a low-viscosity, promoted, thixotropic, medium-reactive DCPD unsaturated polyester resin with lower styrene content.
Why is it suited to repeated hand lay-up?
Its proper sticky surface gives good adhesion when the next layers are laminated on top.
Is it approved for boat building?
Yes. Per the data sheet it is approved by China Classification Society (CCS) for boat building.
What is the shelf life?
6 months without initiator, stored in the dark at 25℃.
Request a Quote for Synolite 8388-P-921 S
Send us your process, part type and monthly volume at info@chemicalsstore.com, and we will confirm availability and lead time and send the TDS and SDS with your quote.