Brand: AOC
Appearance: Clear
Solids content, IR drying:53-58%
Acid value:4-8 mgKOH/g
Viscosity @23℃:180-250 mPa.s
Brand: Henkel
Chemical Type: Epoxy
Appearance (Mixed):Steel Colored Paste
Mix Ratio, by volume -Resin : Hardener|：1:1
Mix Ratio, by weight -Resin : Hardener：100 : 56.5
Cure:Room temperature cure after mixing
Application：North America – Metal Repair
Specific Benefit：
● Hardens in ten minutes
● Non sagging
● Steel filled system – cures to metal-like finish
● Bonds to steel, cast iron,stainless steel, concrete,copper, aluminum, and clean and abraded bronze
Brand: Henkel
Technology:Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Solven
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Mold Sealer
Application Temperature：20 to 60 °C
Specific Benefit：
● No contaminating transfer
● High thermal stability
● Seals mold porosity, scratches or imperfections
Brand: Henkel
Technology:Epoxy Resin
Additional Information:2-component solvent free
toughend epoxy resin
Brand: Henkel
Technology:Solvent based
Chemical Type:Modified resin, fillers and alcohol
Appearance:Brown liquidLMS
Viscosity:Flow similar to SAE 10 Motor Oil
Cure：Air dry
Application:Gasketing & sealing
Specific Benefits:
● For close tolerance flanges
● Slow drying
● Flexible setting
Brand: Henkel
Technology:Anti-Seize
Appearance:Smooth copper colored pasteLMS
Cure：Non-curing
Application:Lubrication
Brand: Henkel
Technology:Acrylic
Chemical Type: Dimethacrylate ester
Appearance (uncured):Green pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Gasketing and Sealing
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured):Yellow pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Thread sealing
Brand: Henkel
Technology：Acrylic
Chemical Type: Methacrylate ester
Appearance (uncured):Opaque, dark purpleLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Application: Sealing
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
