Synolite 8175-W-1

Neogel® 8305-I-0052

Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):
• Representative value:13500-18500 mPa.s
Viscosity at 25℃ (#4, rpm20):
• Representative value:2350-3200 mPa.s
Gel time at 25 ℃: representative value:8-12 minute

AEROSIL R 812

AEROSIL® 200 HV

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 50 g/l

Desmodur® E 15

Brand: COVESTRO
NCO content:4.4 ± 0.2 %
Viscosity (23 °C):7000 ± 1000 mPa·s
Monomeric HDI:< 0.5%

AEROSIL R 812

AEROSIL® 200 V

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 120 g/l

AEROSIL R 812

AEROSIL® 200 F

Brand: EVONIK
losson drying:<1.5 %
pH-value:3.7 – 4.5
SiO2 content:>99.8 %
specific surfacearea(BET):175 – 225 m²/g
tamped density:Approx. 50 g/l

Synolite 8175-W-1

Neogel® 8373-I-0000

Brand: AOC
Appearance: transparent thixotropic liquid
Viscosity at 25℃ (#4, rpm2):Typical Value:13500-18500 mPa.s
Viscosity at 25℃ (#4, rpm20):Typical Value:2350-3200 mPa.s
Gel time at 25 ℃: Typical Value:8-12 minute

Basisil®- 200

Brand: BASHAN
Specific Surface Area BET(m²/g):200±15
pH Value in 4% dispersion:3.8~4.2
Loss on Drying 2h@ 105℃(%):≤1.5
Loss on Ignition 2h@ 1000℃(%):≤2.0
Sieve Residue 45μm(%):≤0.05
Bulk Density (g/l):40~60
SiO2Content(%):≥99.8

Synolite 8175-W-1

Neogel® 8373-W-8921

Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):
•Typical Value Base Gelcoat Brush:35000-60000 mPa.s
•Typical Value Base Gelcoat Spray:21000-40000 mPa.s
Viscosity at 25℃ (#4, rpm20):
•Typical Value Base Gelcoat Brush:5700-7300 mPa.s
•Typical Value Base Gelcoat Spray:3500-5200 mPa.s
Gel time at 25 ℃:
•Typical Value Base Gelcoat Brush:12-18 minutes
•Typical Value Base Gelcoat Spray: 8-15minutes

Synolite 8175-W-1

Neogel® 8373-W-9118

Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):
•Typical Value Base Gelcoat Brush:35000-60000 mPa.s
•Typical Value Base Gelcoat Spray:21000-40000 mPa.s
Viscosity at 25℃ (#4, rpm20):
•Typical Value Base Gelcoat Brush:5700-7300 mPa.s
•Typical Value Base Gelcoat Spray:3500-5200 mPa.s
Gel time at 25 ℃:
•Typical Value Base Gelcoat Brush:12-18 minutes
•Typical Value Base Gelcoat Spray: 8-15minutes

AEROSIL R 812

VESTAMIN IPD

Brand: EVONIK
Molecular weight C10H22N2:170.3g/mol
Equivalent weight:85.2g/val
H-active equipment weight:42.6g/val
Density at 20℃:0.820-0.925gcm3

Get a Quick Quote

Fill out the form below and we will contact you shortly.