Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand:SWANCOR
Appearance:Brown translucent layered fluid
Gel time：20-30min
Suitable substrate:iron
Bonding strength：ASTMD1002， test rate:5mm/min
Iron:130kg/㎡
Brand: SWANCOR®
Product family: Unsaturated Polyester Resin
Product type: Halogen-free flame-retardant resin
Grade: SWANCOR 9213
Flame retardant system: Pre-added, halogen-free
Key features: Excellent flame retardancy, low smoke density, good processability, good mechanical properties
Recommended processes: Hand lay-up, filament winding
Main applications: Flame-retardant FRP components and composite structures
Brand:SWANCOR
Appearance:Turbid liquid
Density:1.09~1.10 g/cm3
Solid Content:54~60%
Viscosity*2:280~420cps
Acid Value：7-13 mgKOH/g
Stability at 80℃：≧24 hours
Brand:Polylite
Appearance:Light yellow transparent viscous liquid
Acid Value:20-26mgKOH/g
Viscosity，25℃:0.7-0.8Pa.s
Solid Content:62-68%
Thermal Stability,80℃:≥24
Gel time:6-18
Brand:SWANCOR
Appearance ：Light Green
Viscosity(cps,25 ℃):10-30
Density(g/cm3,25 ℃:0.9-1.0
Shelf Life (months):24 month
Brand:Polylite
Appearance:Clear liquid,no visible mechanical impurity
Colour(Hazen):40 Max
Epoxy Equivalent(g/mol):210-230
Hydrolytic Chlorine (%):0.50 Max
Inorg.Cl （mg/kg）:50 Max
Volatile /150℃,40min(%):0.6 Max
Softening Point(℃):14-23
Brand:Polylite
Physical State:liquid
Epoxy Equivalent (g/eq):184～190
Color (Gardner):1.0max
Flash Point (℃):150↑
Viscosity (cps, at 25℃)：12000～15000
Hydrolyzable Chlorine Content (ppm)：1000↓
Specific Gravity (g/cm³, 25℃)：1.16
Brand:Polylite
Appearance:Light yellow transparent viscous liquid
Acid Value:14-20mgKOH/g
Viscosity，25℃:0.14-0.16Pa.s
Solid Content:52-58%
Gel time:25-38min
Brand:Polylite
Appearance:Light yellow transparent viscous liquid
Acid Value:19-25mgKOH/g
Viscosity，25℃:0.30-0.60Pa.s
Solid Content:59-66%
Thermal Stability,80℃:≥24h
Gel time:12-30min
Brand:Polylite
Appearance:pink liquid
Acid Value：17-24mgKOH/g
Viscosity，25℃：0.3-0.4 Pa.s
Solid Content：58-64%
Gel time：25-43min
Brand:Polylite
Appearance: Light yellow ransparent viscous liquid
Acid Value: 19-25mgKOH/g
Viscosity，25℃: 0.30-0.60Pa.s
Solid Content: 59-65%
Gelation time,25℃: 6-18
Brand:Polylite
Appearance: light yellow transparent liquid
Density: 1.06±0.02kg/L
Viscosity: 430±150 cps (LVT#3-60rpm/25℃)
Solid content: 62±1.5%
Gelation time: 15-25 minutes
Brand: ATLA
Brassard viscosity RV2, 20rpm:1100 mPas
Thixotropic index:2.0
Oxygen index (pure resin- cured body)：35
Thermal deformation temperature (pure resin cured body)：70
Gel time*：50 Minute
Product code: JS-EDR14-2000-988A
Sizing type: Silane-based
Resin compatibility: Multiple thermoplastic resin systems
Recommended process: Twin screw extrusion
Physical form: Continuous roving
Main applications: Automotive parts, electrical & electronics, mechanical tools, corrosion-resistant parts, sports goods
Brand：JUSHI
Product type: Powder Chopped Strand Mat
Grade: P02
Glass type: E6 Glass
Binder type: Powder binder
Resin compatibility: Unsaturated polyester, vinyl ester, epoxy, phenolic
Recommended processes: Hand lay-up, filament winding, compression molding, continuous laminating
Main applications: Boats, bath equipment, automotive parts, corrosion-resistant pipes, tanks, cooling towers, building components
Brand：JUSHI
Product type: Emulsion Chopped Strand Mat
Grade: E01
Glass type: E-Glass
Binder type: Emulsion binder
Resin compatibility: Unsaturated polyester, vinyl ester
Recommended processes: Hand lay-up, filament winding, compression molding, continuous laminating
Main applications: Boats, bath equipment, automotive parts, corrosion-resistant pipes, tanks, cooling towers, building components
Brand：JUSHI
Glass type：E6
Sizing type：Silane
Typical filament diameter (μm）：12,21,24
Brand：JUSHI
Glass type：E
Sizing type：Silane
Typical filament diameter (μm）：12
Brand：JUSHI
Glass Type：E
Assembled Roving：R
Filament Diameter(μm)：11,13
Product type: Direct Roving
Product code: JS-E6DR24-2400-386T
Grade: 386T
Sizing type: Silane-based
Resin compatibility: Unsaturated polyester, vinyl ester, epoxy
Recommended processes: Filament winding, pultrusion, weaving
Main applications: Pipes, pressure vessels, gratings, profiles, boats, chemical storage tanks
Brand:Nouryon
CAS number:84238-53-9 and 68910-05-4
Physical form:Viscous liquid
Color：Yellow
Odor：Ammonical
Flammability, liquids:Not classified as a flammability hazard
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:133-14-2
Physical form:Off-white homogeneous paste
Molecular Weight:380.0
Chemical name:Di(2,4-dichlorobenzoyl) peroxide
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:1338-23-4; 80-15-9
Physical form:Liquid
Chemical name:Mixture of methyl ethyl ketone peroxide and cumyl hydroperoxide, in solvent mixture
