Overview
OXBOND 333 contains synthetic wax and high-temperature resin, which can form a high gloss hard surface on the mold surface. As one of the recommended international brand products in our auxiliary agent range, this wax is supplied with supply chain resource support for fabricators sourcing a multiple-release demoulding wax for fiberglass and artificial stone.
Product Information
This wax can be demolded multiple times and is suitable for demolding fiberglass and artificial stone. This wax is specially formulated and easy to apply. After application, it will not become too hard and difficult to wipe after several hours or even one or two days, which lets the factory flexibly arrange the construction schedule.
Advantages of OXBOND 333
- A high production paste release with excellent breakdown for fast, even coverage
- Formulated for fast drying with a pure carnauba base
- Extremely easy to apply and wipe
Why Multiple-Release Performance Matters for OXBOND 333
Fabricators running repeated molding cycles need a release wax that holds up over multiple demoldings without requiring reapplication after every part. Because this wax is formulated with synthetic wax and high-temperature resin, it is designed to form a high gloss hard surface capable of supporting multiple releases from a single application.
The pure carnauba base also supports fast drying, which is relevant for production schedules where mold preparation time between parts needs to stay short without compromising the gloss and release performance of the finished surface.
What to Consider When Sourcing OXBOND 333
When sourcing a demoulding wax for fiberglass or artificial stone molding, fabricators typically evaluate ease of application, drying time, and how many releases can be achieved before reapplication is needed.
Working with a supplier that can provide consistent documentation and responsive technical support can help reduce qualification time when approving a new release wax for a production line.
Because this wax stays workable and easy to wipe for a day or two after application, buyers should confirm this working window matches their own production scheduling before switching to a new release product.
Common Application Considerations
Fabricators switching to a new release wax typically run a small trial mold to confirm coverage, gloss, and release performance under their own shop conditions before scheduling a full production changeover, since ambient temperature and mold surface condition can both affect how a paste wax applies.
For artificial stone molding specifically, surface finish requirements can be more demanding than standard fiberglass work, so confirming gloss and release consistency across a full production batch is generally recommended before committing to a single-wax mold preparation routine.
Mold Preparation Best Practices
Before applying any release wax, molds should be thoroughly cleaned of residue from previous release agents, since leftover buildup can interfere with gloss and even coverage on the next application. A thin, even coat generally performs better than a thick application, since excess wax can take longer to haze and may transfer onto the finished part.
Fabricators tracking the number of releases achieved per application can use this information to plan reapplication schedules more accurately, reducing the risk of an unexpected release failure mid-production run.
General Handling and Storage Guidance
As with most paste release waxes, this product should be kept in its original, tightly sealed container, stored in a cool, dry location away from direct sunlight and heat sources, and used within the manufacturer’s recommended shelf life.
Shelf life and specific storage recommendations vary by batch and packaging format, so fabricators should always confirm current shelf life, recommended storage conditions, and any handling precautions against the latest technical data sheet and SDS for the specific batch of OXBOND 333 they are working with.
Where to Source This Product
Thousands Chemicals connects fabricators with OXBOND 333 and related auxiliary agent products through our digital B2B marketplace. Release performance and gloss retention are commonly evaluated using test methods published by organizations such as ASTM International. Our team can help confirm packaging, lead times, and technical documentation for your target application and order volume.
Documentation We Can Provide
For buyers evaluating this demoulding wax for a new fiberglass or artificial stone molding process, our team can help arrange the current technical data sheet and safety data sheet. Having this documentation in hand before finalizing a process can help avoid delays later in your qualification or approval process.
FAQ
What is OXBOND 333 used for?
It is a demoulding wax suitable for demolding fiberglass and artificial stone, forming a high gloss hard surface on the mold that supports multiple releases.
How long does OXBOND 333 stay workable after application?
It will not become too hard and difficult to wipe after several hours or even one or two days, letting the factory flexibly arrange construction.
What is OXBOND 333 formulated with?
It contains synthetic wax and high-temperature resin, with a pure carnauba base formulated for fast drying.
Can you provide technical documentation and bulk pricing?
Yes, technical data sheets and SDS documentation are available on request, and our team can provide bulk pricing and lead times based on your target volume and delivery location.
Get a Quote for OXBOND 333
Contact our team for a quote, technical data sheet, or SDS for this demoulding wax. We support bulk supply and global shipping for fabricators sourcing OXBOND 333 for fiberglass and artificial stone molding applications.
