Chemlease PMR-90 EZ is a semi-permanent, solvent-based mold release agent formulated for composite molding operations that need multiple releases between applications. It forms a thin, durable barrier film that withstands high thermal cycling while reducing labor time and cost compared with wax-based release systems.
Suited for open mold and closed mold composite fabrication, Chemlease PMR-90 EZ is used with polyester, vinyl ester, and epoxy resin systems in industries such as marine, wind energy, and transportation composite manufacturing.
Key Benefits of Chemlease PMR-90 EZ
- HAPs Free*
- High thermal stability
- Easy to apply
- Multiple releases between applications
- Reduces labor time and cost
Application Steps for Base Coats
- Mold surface must be thoroughly cleaned to remove all traces of wax, release agents, and other sealers.
- Surface should be dry and free of contaminants.
- Saturate clean cotton cloth (not dripping) and wipe on a smooth continuous film. Apply no more than a few square feet at a time.
- When the film begins to evaporate at the edge, wipe the surface with a second clean dry cotton cloth. Use a circular motion from the outside, working inwards until film is left dry and clear.
- Repeat above procedures until entire mold surface has been covered.
- Apply 4-5 coats, allowing 15 minutes between each complete coat.
- Allow 30 minutes for full cure. Proceed with production.
Selection Guide for Chemlease PMR-90 EZ
This product is well suited for production environments requiring multiple part releases between mold preparation cycles, high thermal stability, and reduced labor time. For molds requiring a HAPs-free release option with easy application, this grade offers a practical balance of performance factors relevant to release agents used across marine, wind energy, and transportation composite manufacturing.
Sourcing and Supply Chain Support
As a recommended international brand product, it is available in standard containers with bulk supply options for large-volume composite manufacturers. We ship globally by sea and air freight, with COA and MSDS provided for every shipment. Buyers should verify current regulatory status and application parameters against the manufacturer’s official technical documentation before full-scale production use. Contact us for current lead times and packaging options.
FAQ
How many releases can I get from a single application of Chemlease PMR-90 EZ?
Chemlease PMR-90 EZ is designed for multiple releases between applications, reducing the frequency of mold prep and lowering labor time and cost compared with single-release wax systems. Exact release count depends on part geometry, resin system, and cure temperature.
Is Chemlease PMR-90 EZ compatible with polyester and epoxy resin systems?
Yes, it is compatible with polyester, vinyl ester, and epoxy resin systems commonly used in composite molding.
Is Chemlease PMR-90 EZ HAPs free?
Yes, Chemlease PMR-90 EZ is formulated as HAPs free*. Please confirm current regulatory status against the latest technical data sheet for your region.
Do you provide COA and MSDS with shipments?
Yes, COA and MSDS documentation is provided with every shipment to support your quality control and regulatory compliance requirements.
What is the MOQ for Chemlease PMR-90 EZ?
MOQ depends on packaging format and destination. Contact our sales team with your target volume and shipping location for a tailored quote.
Looking to source Chemlease PMR-90 EZ for your next composite molding project? Contact our team today with your application details and volume requirements, and we will help connect you with the right supply chain resources.
