EC-106R Alkaline liquid degreaser is a silicon-free alkaline degreasing agent applied by spray or dipping to clear oil and oxide films from metal surfaces before downstream processing. Composed of inorganic salts, an organic chelating agent, and a surfactant system, it is formulated for fabricators who need reliable surface preparation without introducing silicone residue that could interfere with subsequent coating or plating steps.
EC-106R Product Features
- High carnauba wax content polishes to high gloss without streaking
- Good heat and chemical resistance properties
- Easy application and wipe-off characteristics
- Reduced wax build-up and styrene accumulation
These features make it a practical choice for production lines that need consistent surface cleanliness between processing steps, particularly where residual wax or styrene accumulation has historically slowed down cycle times or affected finish quality.
EC-106R Uses and Handling
EC-106R is biodegradable and nonflammable. It does not hurt the skin, has no excitant odor, and is reusable, which supports repeated use in a production environment without frequent replacement.
Because it is nonflammable with low vapor emissions, it is generally straightforward to handle on the shop floor. At temperatures below 20℃, warm water should be used to heat the solution, making the degreaser easier to apply and improving its cleaning performance in cooler conditions.
Application and Equipment Compatibility
In the degreasing trough process for EC-106R, the pump and piping system should be constructed of medium carbon steel. For the spray process, a nozzle made of 300 series stainless steel or polypropylene is recommended. Plate heat exchangers used in this process should be built from 316 stainless steel.
All components that contact the degreaser during processing, including sealing rings, should use Teflon or Viton material to maintain compatibility with the alkaline formulation over repeated cycles. Fabricators setting up a new degreasing line for this product should confirm these material specifications with their equipment supplier before installation.
Where EC-106R Fits in Composite and Metal Fabrication Workflows
It is commonly specified alongside auxiliary agents such as release agents and gelcoats used in marine, automotive, construction, and electrical component manufacturing, where clean metal tooling and substrates are a prerequisite for consistent part quality. Sourcing managers evaluating a degreasing agent for these industries typically confirm compatibility with existing piping and spray equipment before switching products, since material compatibility affects both equipment lifespan and cleaning consistency.
Frequently Asked Questions
Is EC-106R safe to handle on a production line?
EC-106R is biodegradable, nonflammable, has low vapor emissions, and does not hurt the skin, though standard PPE and handling practices for alkaline cleaning agents should still be followed.
Does EC-106R need to be heated before use?
At temperatures below 20℃, warm water should be used to heat EC-106R to make it easier to use and improve cleaning performance.
What equipment materials are compatible with EC-106R?
Recommended materials include medium carbon steel for pumps and piping, 300 series stainless steel or polypropylene for spray nozzles, 316 stainless steel for plate heat exchangers, and Teflon or Viton for sealing rings.
Can this degreaser be reused?
Yes. It is formulated to be reusable, supporting repeated use in a production degreasing process.
Is this product free of silicone?
Yes. It is a silicon-free alkaline degreaser, which helps avoid silicone contamination on surfaces that will later be coated, bonded, or plated.
Composite and metal fabricators evaluating EC-106R for a new or existing degreasing line are welcome to submit an inquiry for technical data sheets, packaging options, and supply chain resource support.
