LOCTITE LB 8008 is an anti-seize compound used to protect threaded metal connections from galling, corrosion, and seizing during assembly and disassembly. For equipment manufacturers and composite production facilities that need reliable thread protection on nuts, bolts, and fasteners, LOCTITE LB 8008 is applied as a thin coating before assembly.
Typical Properties of LOCTITE LB 8008
Buyers evaluating this anti-seize compound for a new sourcing relationship should reference the physical properties listed below alongside the current Safety Data Sheet before specifying it into an assembly procedure.
| Property | Typical Value |
|---|---|
| Specific Gravity @ 25°C | 1.2 to 1.4 |
| Density @ 25°C | 1.27 g/mL |
| Solids / Non-Volatile Content | 40% |
| Penetration (ISO 2137) | 320 to 380 (1/10 mm) |
| Flash Point | See SDS |
How LOCTITE LB 8008 Is Applied to Threads
For best performance, the mating surface should be clean and free of grease before application. A thin coating of this anti-seize compound is applied to the threads and flats of nuts and bolts before assembly. When grinding or wire brushing threaded parts as part of surface preparation, a dust mask should be worn, since dust from cleaning threads may contain metal compounds and inhalation may cause lung injury or other harm.
Why Sourcing Consistency Matters
Inconsistent solids content or penetration in an anti-seize compound can lead to uneven thread protection, galling, or difficult disassembly during maintenance across composite manufacturing and equipment assembly operations. Buyers who source this product through a documented supply chain reduce the risk of receiving mismatched batches with inconsistent consistency or coverage.
Where to Source LOCTITE LB 8008
Composite material buyers and assembly manufacturers can source this anti-seize compound and related auxiliary agent products through Thousands Technology’s supply chain resource support, which helps FRP factories, boat builders, and pultrusion manufacturers maintain consistent access to recommended international brand products. For handling and safety classification references used across manufacturing operations, buyers can also review ASTM standards and publications.
Documentation
Before specifying this product into a production process, buyers should request the current Technical Data Sheet and Safety Data Sheet to confirm properties and handling requirements for their specific fastener applications.
Frequently Asked Questions
What is LOCTITE LB 8008 used for?
It is used as an anti-seize compound applied to threads and flats of nuts and bolts to protect against galling and seizing during assembly.
How is LOCTITE LB 8008 applied to fasteners?
The mating surface should be clean and free of grease, then a thin coating is applied to the threads and flats before the fastener is assembled.
What safety precaution applies when cleaning threads before using LOCTITE LB 8008?
A dust mask should be worn when grinding or wire brushing threaded parts, since dust from cleaning threads may contain metal compounds that can cause lung injury if inhaled.
Where can I get technical support for sourcing LOCTITE LB 8008?
Buyers can request the current TDS and SDS and reach out through Thousands Technology’s supply chain resource support for sourcing guidance on LOCTITE LB 8008 and related assembly products.
Ready to source LOCTITE LB 8008 for your next assembly run? Contact our team to request documentation, discuss packaging options, and get supply chain resource support for your production schedule.
