In the temperature range of 100-170°C, Trigonox® C can be used as an initiator for the solution polymerization or copolymerization of acrylate and methacrylate, especially for the production of coatings. Trigonox® C can also be used as initiator for bulk and suspension polymerization or copolymerization of acrylate and methacrylate.
| Active oxygen | 2.72-2.82 % |
| Appearance | White to off-white emulsion |
| Assay | 59.0-61.0 % |
| Viscosity, -10°C (Brookfield LVT, spindle #3) | 200-1000 mPa.s |
| Density, 0 °C | 0.980 g/cm³ |
Polymerization of vinyl chloride: Trigonox® EHP-W60 is applied as an initiator for the suspension polymerization of vinylchloride in the temperature range between 40°C and 65°C. Trigonox® EHP-W60 can be used in combination with other peroxides such as 1,1,3,3-Tetramethylbutyl peroxyneodecanoate (Trigonox® 423), Cumyl peroxyneodecanoate (Trigonox® 99) or Dilauroyl peroxide (Laurox) to increase reactor efficiency. Reasons to use a water based peroxide emulsion instead of a solvent based peroxide are the following: enhanced safety, easy to use (pumpable) in ‘closed reactor technology’, easy to dilute with water.
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:37206-20-5
Physical form:Liquid
Chemical name:Methyl isobutyl ketone peroxide
Brand：Perkadox®
CAS number：94-36-0
Molecular Weight：242.2
Concentration：3.20-3.37%
Chemical name：Dibenzoyl peroxide, paste, 50% in dipropylene glycol dibenzoate and water
Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:94-36-0
Physical form:Granular powder
Chemical name:Dibenzoyl peroxide
Brand：Trigonox
Chemical family：Organic peroxide
CAS number：26748-41-4
Physical form：Liquid
Molecular Weight：244.4
Chemical name：tert-Butyl peroxyneodecanoate, 75% solution in isododecane
Brand:Polylite
Appearance: Clear liquid,no visible mechanical impurity
Epoxy Equivalent (g/eq): 176–184
Color (Gardner): Max 1.0
Flash Point (℃): Above 150
Viscosity (cps, at 25℃): 8000–11000
Hydrolyzable Chlorine Content (ppm): Below 1000
Specific Gravity (g/cm³, 25℃): 1.16
Brand:Polylite
Appearance:Clear liquid,no visible mechanical impurity
Colour(Hazen):40 Max
Epoxy Equivalent(g/mol):210-230
Hydrolytic Chlorine (%):0.50 Max
Inorg.Cl （mg/kg）:50 Max
Volatile /150℃,40min(%):0.6 Max
Softening Point(℃):14-23
All payments are secured with SSL encryption and PCI DSS standards.
If your order is undelivered, defective, or damaged, you can request a refund.
