Overview
Trigonox C is an organic peroxide used as an initiator for the solution polymerization or copolymerization of acrylate and methacrylate, particularly for coatings production, across a temperature range of 100-170°C. Buyers sourcing this product also use it as an initiator for bulk and suspension polymerization or copolymerization of acrylate and methacrylate. Because it functions across polymer production, polymer crosslinking, thermoset composites, and acrylics production market segments, Trigonox C is used by coatings formulators, polymer producers, and composite manufacturers who need a reliable initiator with a defined operating temperature window.
Specifications
| Active oxygen | 8.07-8.24 % |
| Appearance | Clear liquid |
| Assay | ≥ 98.0 % |
| Color | ≤ 100 Pt-Co |
| Hydroperoxides as TBHP | ≤ 0.099 % |
| Inorganic + organic hydrolysable chloride | ≤ 50 mg/kg |
Characteristics
| Crystallization point | 8°C |
| Density, 20°C | 1.04 g/cm³ |
| Viscosity, 20°C | 6.5 mPa.s |
Applications of Trigonox C Across Market Segments
Trigonox C can be used for the market segments of polymer production, polymer crosslinking, thermoset composites, and acrylics production, with their different applications and functions. In the temperature range of 100-170°C, it can be used as an initiator for the solution polymerization or copolymerization of acrylate and methacrylate, especially for the production of coatings. It can also be used as an initiator for bulk and suspension polymerization or copolymerization of acrylate and methacrylate, giving formulators flexibility across several process types.
Why the Operating Temperature Range Matters
Because the product is effective across a relatively wide range of 100-170°C, formulators have flexibility to match initiator performance to their specific reaction profile, whether that is a lower-temperature solution process for coatings or a higher-temperature bulk or suspension process. The tight active oxygen specification of 8.07-8.24% supports predictable initiation kinetics within this range.
Why Sourcing Consistency Matters for Buyers
Initiator performance in acrylate and methacrylate polymerization depends on consistent active oxygen content and assay from batch to batch. Trigonox C is specified with a minimum assay of 98.0%, along with controlled limits on hydroperoxides as TBHP (0.099% max) and hydrolysable chloride content (50 mg/kg max), both of which matter for coatings applications sensitive to impurities. Buyers running continuous polymer production or coatings formulation lines typically request certificates of analysis confirming these values before each shipment is released.
For thermoset composite manufacturers and acrylics producers planning production schedules around confirmed delivery windows, supply chain reliability is as important as the technical specification itself. Working with a supplier that can provide consistent lot-to-lot quality and documentation helps reduce the risk of production delays tied to organic peroxide availability.
What to Consider When Sourcing Trigonox C
Buyers evaluating this product for a new acrylate or methacrylate polymerization process should confirm that the 100-170°C operating range fits their existing reaction conditions, and request the safety data sheet to plan for the correct storage, transport, and handling procedures required for organic peroxides. The crystallization point of 8°C should also be factored into storage and transport planning in cooler climates, since crystallization can affect handling and dosing.
Sourcing managers should also confirm packaging options and minimum order quantities that match their production volume, and verify that their existing handling equipment is compatible with a clear liquid organic peroxide of this viscosity and density range.
General Handling and Storage Guidance
As with other organic peroxide products, Trigonox C should be stored in a cool, well-ventilated area away from direct sunlight, incompatible materials, and sources of contamination, while accounting for its 8°C crystallization point. Containers should remain tightly closed when not in use, and any spilled material should be handled according to the safety data sheet to avoid decomposition risks associated with concentrated organic peroxides.
Personnel handling this product should use appropriate personal protective equipment and follow site-specific procedures for organic peroxide storage segregation. Buyers new to handling this initiator are encouraged to review the full safety data sheet and consult applicable transport regulations before shipment.
Where to Source This Product
Chemicalsstore.com supplies Trigonox C and other organic peroxide products for polymer production, coatings, and thermoset composite applications, with supply chain resource support for recommended international brand products. Product handling and classification should follow applicable ASTM and regulatory guidance for organic peroxides.
Documentation We Can Provide
Upon request, we can provide the safety data sheet (SDS), certificate of analysis (COA), and available technical data for Trigonox C to support your procurement and quality review process.
FAQ
What is Trigonox C used for?
Trigonox C is an initiator for the solution, bulk, and suspension polymerization or copolymerization of acrylate and methacrylate, particularly for coatings production, across polymer production, polymer crosslinking, thermoset composites, and acrylics production market segments.
What is the operating temperature range for Trigonox C?
It is effective in the temperature range of 100-170°C for acrylate and methacrylate polymerization or copolymerization processes.
What is the active oxygen content of Trigonox C?
It has an active oxygen content of 8.07-8.24%, with a minimum assay of 98.0%.
What is the crystallization point of Trigonox C?
Trigonox C has a crystallization point of 8°C, which should be factored into storage and transport planning.
Get a Quote for Trigonox C
Contact our team for pricing, available documentation, and supply chain resource support for Trigonox C to fit your polymer production, coatings, or thermoset composite application requirements.
