Palatal P61TV-956A

Palatal P61TV-956A is a pre-accelerated, thixotropic DCPD unsaturated polyester resin with low shrinkage and low styrene emission for hand lay-up and spray-up, approved by CCS and LR for boat building.

Palatal P61TV-956A is a low-viscosity, pre-accelerated, thixotropic DCPD unsaturated polyester resin from AOC’s Palatal range, designed for hand lay-up and spray-up processes. Fabricators source Palatal P61TV-956A for its low shrinkage, low styrene emission and low fiber print, which give FRP parts a good surface with low odor. The resin is approved by China Classification Society (CCS) and Lloyd’s Register (LR) for boat building.

Per the manufacturer data sheet, this medium-reactive DCPD polyester resin incorporates an LSE (low styrene emission) system and does not contain monomeric amines. A color change system helps operators in spray-up applications, and the resin can be used with powder- and emulsion-bound mats.

Palatal P61TV-956A

Key Benefits

  • Low shrinkage and good surface quality with low fiber print
  • Outstanding fiber wetting and operation performance
  • Low styrene emission from the built-in LSE system
  • Good curing with thin laminations; thick laminates can be made in one go thanks to low exothermic heat
  • LR and CCS certification for marine use

Palatal P61TV-956A Technical Data

Product Specification

PropertyValueUnitTest Method
AppearanceHazy–TM 2265
Solids content (IR drying)64–67%TM 2033
Viscosity @ 23℃260–300mPa·sTM 2313
Gel time (25℃ to 35℃)42–47minTM 2625
Cure time52–66minTM 2625
Peak temperature120–150℃TM 2625
Reactivity measured with 3.0 g Butanox M50 added to 100 g resin.

Liquid Resin Typical Properties

PropertyValueUnit
Flash point33℃
Density @ 23℃1100kg/m³
ColorBlue–
Stability (no initiator, dark, 25℃)6months

Unfilled Casting Typical Properties

PropertyValueUnitTest Method
Tensile strength70MPaISO 527-2
Tensile modulus3.8GPaISO 527-2
Tensile elongation2.3%ISO 527-2
Flexural strength130MPaISO 178
Flexural modulus3.8GPaISO 178
Barcol hardness (GYZJ 934-1)45–DIN EN59
HDT85℃ISO 75 Ae
Unnotched impact strength18kJ/m²ISO 179
Density @ 23℃1170kg/m³DIN 53479
Volume shrinkage6%–
Cured with 1.0 g Butanox M50 per 100 g resin; 24 h at room temperature, then post-cured 24 h at 70℃.

Glass-Reinforced Laminate Properties

PropertyLaminate ILaminate IIUnitTest Method
Tensile strength125205MPaISO 527-2
Tensile modulus9.112.6GPaISO 527-2
Elongation1.92.0%ISO 527-2
Flexural strength225315MPaISO 178
Flexural modulus8.59.9GPaISO 178
Impact strength110175kJ/m²GB/T 2571
Glass content4046%GB/T 2577
Laminate I: EMC450 ×6. Laminate II: (EMC450 + EWR400) ×3 + EMC450. Cured with 2% Butanox M-50, 24 h at room temperature + 3 h at 80℃.

Mechanical properties are tested to standards such as ISO 527-2 for tensile and ISO 178 for flexural performance.

Applications of Palatal P61TV-956A DCPD Resin

The resin was developed for hand lay-up and spray-up of high-performance constructional laminates. It combines good mechanical properties with good processability, very good fiber wetting and impregnation, good through-cure and relatively low shrinkage. Typical uses include boat hulls and decks, where its CCS and LR approvals apply, and other open-mold FRP parts where low styrene emission in the workshop matters. Pair it with a suitable MEKP catalyst from our organic peroxide range, or compare it with the orthophthalic grade Palatal P61TV-956.

Processing Guidelines

  • Use MEKP as the curing agent at 1%–2.5%, adjusted to workshop temperature. If a gel time longer than 60 minutes is needed, TBC can be added as an inhibitor.
  • Keep the workshop at 18℃–32℃ and 40%–90% relative humidity for stable working conditions.
  • The resin contains barrier-forming agents that reduce styrene emission but may reduce bonding to over-laminates. Delayed lay-up bonds well if the surface is not too resin-rich; otherwise sanding may be needed.
  • As a thixotropic resin, stir it gently before use.
  • Cure at room temperature for 24 hours, then post-cure at 80–100℃ for 3–6 hours for best properties. Post-curing is important for chemical-resistant parts.

Storage and Safety

Store Palatal P61TV-956A in a dark, dry place at 5℃–30℃, in 100% light-tight containers away from direct sunlight; shelf life is reduced at higher temperatures. According to the safety data sheet, the resin is a flammable liquid and vapour, causes serious eye irritation and skin irritation, may cause respiratory irritation, is suspected of damaging fertility or the unborn child and of causing cancer, causes damage to hearing organs through prolonged or repeated exposure, and is toxic to aquatic life with long-lasting effects. Use appropriate protective equipment and good ventilation. The TDS and SDS are available on request.

Frequently Asked Questions About Palatal P61TV-956A

What type of resin is Palatal P61TV-956A?

It is a pre-accelerated, thixotropic, medium-reactive DCPD unsaturated polyester resin with a low styrene emission (LSE) system.

How is it different from Palatal P61TV-956?

P61TV-956 is an orthophthalic resin, while the 956A grade is DCPD-based, with low shrinkage, low styrene emission and low fiber print.

Is it approved for boat building?

Yes. Per the data sheet it is approved by China Classification Society (CCS) and Lloyd’s Register (LR) for boat building.

What catalyst and dosage are recommended?

MEKP at 1%–2.5%, adjusted to the workshop temperature.

Request a Quote for Palatal P61TV-956A

Send us your process, laminate type and monthly volume at info@chemicalsstore.com, and we will confirm availability and lead time and send the TDS and SDS with your quote.

Transportation

To make chemical sourcing more efficient reliable, and intelligent

Our Partners

Packaging & Shipping

Every process of our packaging is very strict
just to betterdeliver the goods to your hands!

Secure Payment

PAYMENT OA,DP,VTB,T/T,Westem Union, MoneyGram, Paypa

Palatal P61TV-956

Brand: PALATAL® (AOC)
Product family: Unsaturated Polyester Resins / Orthophthalic Polyester Resins
Product type: Pre-accelerated, Thixotropic Unsaturated Polyester Laminating Resin
Grade: PALATAL® P61TV-956
Chemical nature: Orthophthalic Polyester Resin Based on Orthophthalic Acid and Standard Glycols in Styrene

PALATAL P 61 TV-956 N

Brand: AOC
Appearance: Hazy
Viscosity @23℃:180-220 mPa.s
Solids content, IR drying:54-59 %
Acid value:8-15 mgKOH/g
Gel time(25℃to35 °C):20-38 min

Get a Quote

Get a Quick Quote

Fill out the form below and we will contact you shortly.