LOCTITE® LB 8008 C5-A 1LBEN

LOCTITE®LB 8008 C5-A™ provides a shield against high temperature seizing and galling. All mated parts, studs, bolts,flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. Typical applications include original equipment and maintenance, and equipment associated with petroleum chemicals, steel mills, power plants, marine and foundries. This product is typically used in applications with an operating range of -29 °C to +982 °C.

TYPICAL PROPERTIES OF UNCURED MATERIAL

Specific Gravity @ 25 °C	1.2 to 1.4 ^LMS
Density @ 25 °C, g/m	1.27
Solids/Non-Volatile Content, %	40
Penetration, ISO 2137, 1/10 mm	320 to 380 ^LMS</sup
Flash Point	See SDS

Directions for Use

1. For best performance the mating surface should be clean and free of grease
2. Note: When grinding or wire brushing, use a dust mask. Dust from cleaning threads may contain metal compounds. Inhalation may cause lung injury or other harm.
3. Apply thin coating to threads and flats of nuts and bolts,assemble.