LOCTITE® EA 1C

LOCTITE® EA 1C™ is a general purpose adhesive and sealant that bonds, seals, and repairs a wide variety of materials including metals, most plastics, and wood.

TYPICAL PROPERTIES OF UNCURED MATERIAL

Resin Properties

Specific Gravity @ 25 °C	1.63
Flash Point	See SDS

Hardener Properties

Specific Gravity @ 25 °C	1.66
Flash Point	See SDS

Mixed Properties

Pot life 100 grams, @ 25 °C, minutes	≥20^LMS
Flash Point	See SDS

Application

1. Bonding surfaces should be clean, dry, and free of contamination.
2. Once the adhesive is applied, the bonded parts should be held in contact until the part has developed handling strength (3 to 4 hours @ 25 °C) note: this can vary with different bond configurations. It is not necessary to clamp the parts unless movement during cure is likely.