Brand:Dissolvine®
Chemical family:Chelate
CAS number:6381-92-6 (dihydrate)
Physical form:Crystalline
Molecular Weight:372.2
Chemical name:Ethylenediaminetetraacetic acid, disodium salt
IUPAC Name:2-methylpentane-1,5-diamine
CAS Number:15520-10-2
Molecular Formula :C6H16N2
Molecular Weight: 116.208 g/mol
Description: Clear low viscosity liquid, free of suspended materials
High tensile strength, allowing for use in hand lay-up process to produce large-area parts,
no airborne fiber when operating, good wet-through and fast wet-out in resins, rapid air
lease, high mechanical strength, superior acid corrosion resistance
E10 Emulsion ChoppedStrand Matis made of E-glass chopped strands. The strand is produced in a special drawing process,randomly and evenly distributed,and then held together to form themat by an emulsion binder E10 is compatible with unsaturated polyesterand vinyl ester resins.
Good moldability, good wet-through and fast wet-out in resins, rapid air lease reducing rolling out times and increasing productivity, low resin consumption, high mechanical
strength of composite products, superior acid corrosion resistance
CAS#: 31570-04-4
FDA/NSF: ≤ 0.5 wt.%
Functions: Secondary antioxidant, Phosphite
Product Applications: Gear Oils, Grease oils
Product Classes: Additive Component, Antioxidant, Extreme Pressure / Antiwear, Lubricants, Metalworking & Grease
Apparent bulk density:100-120 kg/m³
Appearance:Black free-flowing pellets
Ash:≤0.1 %
Fines <125 micron: ≤7 %
Grit content: ≤30 mg/kg
Iodine absorption :1000-1100 mg/g
Moisture: ≤0.5 %
pH: 9.0-10.5
Pore volume, DBP: 480-510 ml/100g
Volatiles: ≤1.0 %
Technology:Mold Release
Appearance:Clear, colorlessLMS
Chemical Type:Solvent Based Polymer
Odor:Solvent
Cure:Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:15 to 60 °C
Technology:Mold Release
Appearance:Clear, colorlessLMS
Chemical Type:Solvent Based Polymer
Odor:Hydrocarbon
Cure:Room temperature cure
Application:Mold Sealer
Application Temperature:13 to 35 °C
Technology:Mold Release
Appearance:Clear, colorlessLMS
Chemical Type:Solvent Based Polymer
Odor:Hydrocarbon
Cure:Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:13 to 41 °C
MAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties.
Tensile strength:70 MPa ISO 527
Tensile modulus:3600 MPa ISO 527
Elongation at break:3,5 % ISO 527
Flexural strength:125 MPa ISO 178
Flexural modulus:3600 MPa ISO 178
Neogel® 8373-W-XXXX UV is an iso/Neopentylglycolgelcoat which has a combination of importantcharacteristics: easy application, good resistance to longimmersion in water (good blister resistance), excellentweather ability (less yellowing), air release, goodmechanical properties, conforms USA ANSI-Z-124-1,approved by DNV Italia and Italian RINA.
Neogel® 8373-W-XXXX UV is an iso/Neopentylglycolgelcoat which has a combination of importantcharacteristics: easy application, good resistance to longimmersion in water (good blister resistance), excellentweather ability (less yellowing), air release, goodmechanical properties, conforms USA ANSI-Z-124-1,approved by DNV Italia and Italian RINA.
General purpose,suitable formultiple processes
Good wet-through and fast wet-out in resins,easy air release
Good mechanical properties of parts
Fill out the form below, and we will be in touch shortly.