Brand: AOC
Appearance: Hazy
Viscosity @23℃:180-250 mPa.s
Solids content, IR drying:52-58 %
Acid value:11-18 mg KOH/g
Gel time(25℃to35 °C):40-70 min
Brand: AOC
Appearance: Hazy
Viscosity @23℃:180-220 mPa.s
Solids content, IR drying:54-59 %
Acid value:8-15 mgKOH/g
Gel time(25℃to35 °C):20-38 min
Brand: AOC
Appearance: Clear
Viscosity @23℃:400-550 mPa.s
Solids content, IR drying:59-65 %
Acid value:20-26 mgKOH/g
Gel_time1(25℃ until 35 °C):15-22 min
Gel_time2 (66℃ until 88 °C):4.5-6.6 min
Cure time2(66℃ until peak):6.5-8.6 min
Brand: AOC
Appearance: Hazy
Viscosity @23℃:180-220 mPa.s
Solids content, IR drying:56-62%
Acid value:10-18 mgKOH/g
Gel time(25℃to35 °C):20-38 min
Brand：Perkadox®
Chemical family：Organic peroxide
CAS number：2212-81-9, 25155-25-3
Physical form：Powder
Molecular Weight：338.5
Concentration：3.7-3.9%
Chemical name：Di(tert-butylperoxyisopropyl) benzene
Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:25155-25-3, 2212-81-9
Physical form:Flakes
Molecular Weight:338.5
Concentration:9.26% min.
Chemical name:Di(tert-butylperoxyisopropyl)benzene
Brand：Perkadox®
Chemical family：Organic peroxide
CAS number：15520-11-3
Physical form：Powder
Molecular Weight：398.5
Chemical name：Di(4-tert-butylcyclohexyl) peroxydicarbonate
Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:80-43-3
Physical form:Crystal
Molecular Weight:270.4
Concentration:5.86% min.
Chemical name:Dicumyl peroxide
Brand：Perkadox®
CAS number：94-36-0
Molecular Weight：242.2
Concentration：3.20-3.37%
Chemical name：Dibenzoyl peroxide, paste, 50% in dipropylene glycol dibenzoate and water
Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:94-36-0
Physical form:Granular powder
Chemical name:Dibenzoyl peroxide
Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:94-36-0
Physical form:Granular powder
Chemical name:Dibenzoyl peroxide
Brand：Perkadox®
Chemical family：Organic peroxide
CAS number：94-36-0
Physical form：Powder
Molecular Weight：242.2
Chemical name：Dibenzoyl peroxide, 75% with water
Brand:Perkadox®
CAS number:1931-62-0
Physical form:Paste
Molecular Weight:188.2
Concentration:3.23-3.57%
Chemical name:tert-Butyl monoperoxymaleate, 40% in dibutyl maleate
Release film ensures that breather fabric or flow mesh does not bond to the curing resin. By use of various perforation patterns, the amount of resin that is bled out of the laminate can be controlled, to achieve the correct fiber ratio within the composite.
Brand:Tokuyama
Specific surface area:200ÿ240 mÿ2ÿ /g
(BET) Bulk density:40 g/L (approximately)
pH (4% suspension):4.2
SiO2 purity (dry basis): > 99.9 %
Cl:< 50 ppmÿ
Al:< 20 ppmÿ
Fe:< 20 ppmÿ
325 mesh coarse: < 0.01 %
grain moisture (loss on drying method, %):< 1.5 %
Brand:BYK
Density (20 °C): 0.86 g/ml
Non-volatile matter (10 min, 150 °C): 29%
Solvents: Isobutanol/solvent naphtha 9/1
Flash point: 27 °C
Refractive index (20 °C): 1.43
