Benefits

Neogel® 8373-W-XXXX is an iso/Neopentylglycolgelcoat which has a combination of importantcharacteristics: easy application, good resistance to longimmersion in water (good blister resistance), excellentweather ability (less yellowing), air release, goodmechanical properties, conforms USA ANSI-Z-124-1,approved by DNV Italia and Italian RINA.

Application Characteristics

Neogel® 8373-W-XXXX UV is pre-accelerated thixotropic,ready for use and available in a wide range of colours, in the following types:

• Spray type (Neogel® 8373-W-XXXX UV)
• Brush type (Neogel® 8373-W-XXXX UVH)

It can also be supplied in a standard or additional versions on request:

• Spray (Paraffinated)
• Brush (Paraffinated)

The Spray type can be applied with conventional equipment with these recommended settings:

• Spray gun (nozzle φ 2.0-3.5 mm, pressure 4-5 bar)
• Airless equipment (nozzle types: 18/40-21/40)

In order to obtain optimum performance it is advisable to operate as follows:

• Temperature between 18℃ and 25℃
• Cure with recommended MEKP* 50% solution, adjust amount between 1.0-2.5%
• Thickness of the film 600-800g/m²