Neogel® 8373-W-9512 UV is developed especially for boat building, swimming pools, sanitary ware, furniture and those products require good weather ability.
| Supplier | |
|---|---|
| Resin Type | Vinyl Resin |
| Pre-promotion Thixotropy | / |
| Molding Process | Filament Winding, Hand Lay-up, Spraying |
| Industry | Automotive & Transportation, Building & Construction, Home Renovation, Marine Vessels, Petrochemical, Wind Energy |
Neogel® 8373-W-9124 UV is an iso/Neopentylglycol gelcoat which has a combination of important characteristics: easy application, good resistance to long immersion in water (good blister resistance), excellent weather ability (less yellowing), air release, good mechanical properties, conforms USA ANSI-Z-124-1, approved by DNV Italia and Italian RINA.
Neogel® 8373-W-9312UV is pre-accelerated thixotropic, ready for use and available in a wide range of colours, in the following types:
• Spray type (Neogel® 8373-W-9124 UV)
• Brush type (Neogel® 8373-W-9124 UVH)
It can also be supplied in a standard or additional versions on request:
• Spray (Paraffinated)
• Brush (Paraffinated)
The Spray type can be applied with conventional equipment with these recommended settings:
• Spray gun (nozzle φ 2.0-3.5 mm, pressure 4-5 bar)
• Airless equipment (nozzle types: 18/40-21/40)
In order to obtain optimum performance it is advisable to operate as follows:
• Temperature between 18℃ and 25℃
• Cure with recommended MEKP* 50% solution, adjust amount between 1.0-2.5%
• Thickness of the film 600-800g/m²
*Butanox M50 (Akzo Nobel)
To make chemical sourcing more efficient reliable, and intelligent
Every process of our packaging is very strict
just to betterdeliver the goods to your hands!
