Typical applications include stamped sheet metal covers(timing covers and oil sumps) where good oil resistance and the ability to withstand high joint-movement is required. The
thixotropic nature of LOCTITE® SI 5910® reduces the migration of liquid product after application to the substrate.
| Supplier | |
|---|---|
| Additive Classification | Adhesive |
| Industry | Automotive & Transportation, Building & Construction, Electrical & Electronics, Marine Vessels, Wind Energy |
| Specific Gravity @ 20 °C | 1.34 |
| Extrusion Rate, g/min: Pressure 0.62 MPa, time 15 seconds, temperature 25 °C: Semco Cartridge |
300 to 650LMS |
| Flash Point | See SDS |
1. For best performance bond surfaces should be clean and free from grease.
2. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
3. The bond should be allowed to cure (e.g. seven days),before subjecting to heavy service loads.
4. Excess material can be easily wiped away with non-polar solvents.
To make chemical sourcing more efficient reliable, and intelligent
Every process of our packaging is very strict
just to betterdeliver the goods to your hands!
