Brand:Dissolvine®
Chemical family:Chelate
CAS number:164462-16-2
Physical form:Liquid
Molecular Weight:271.1
Chemical name:Methylglycine N,N-diacetic acid, trisodium salt
Brand:Dissolvine®
Chemical family:Chelate
CAS number:6381-92-6 (dihydrate)
Physical form:Crystalline
Molecular Weight:372.2
Chemical name:Ethylenediaminetetraacetic acid, disodium salt
IUPAC Name：2-methylpentane-1,5-diamine
CAS Number：15520-10-2
Molecular Formula ：C6H16N2
Molecular Weight： 116.208 g/mol
Description： Clear low viscosity liquid, free of suspended materials
High tensile strength, allowing for use in hand lay-up process to produce large-area parts,
no airborne fiber when operating, good wet-through and fast wet-out in resins, rapid air
lease, high mechanical strength, superior acid corrosion resistance
E10 Emulsion ChoppedStrand Matis made of E-glass chopped strands. The strand is produced in a special drawing process,randomly and evenly distributed,and then held together to form themat by an emulsion binder E10 is compatible with unsaturated polyesterand vinyl ester resins.
Good moldability, good wet-through and fast wet-out in resins, rapid air lease reducing rolling out times and increasing productivity, low resin consumption, high mechanical
strength of composite products, superior acid corrosion resistance
CAS#: 31570-04-4
FDA/NSF: ≤ 0.5 wt.%
Functions: Secondary antioxidant, Phosphite
Product Applications: Gear Oils, Grease oils
Product Classes: Additive Component, Antioxidant, Extreme Pressure / Antiwear, Lubricants, Metalworking & Grease
Apparent bulk density：100-120 kg/m³
Appearance：Black free-flowing pellets
Ash：≤0.1 %
Fines <125 micron: ≤7 %
Grit content: ≤30 mg/kg
Iodine absorption :1000-1100 mg/g
Moisture: ≤0.5 %
pH: 9.0-10.5
Pore volume, DBP: 480-510 ml/100g
Volatiles: ≤1.0 %
Technology：Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Solvent
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Release Coatings
Application Temperature：15 to 60 °C
Technology：Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Hydrocarbon
Cure：Room temperature cure
Application：Mold Sealer
Application Temperature：13 to 35 °C
Technology：Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Hydrocarbon
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Release Coatings
Application Temperature：13 to 41 °C
MAXGUARD GN // H/S are premium gelcoats based on a special isophthalic/NPG resin. The base resin and the gelcoat formula are optimized to give final products excellent mechanical and weathering properties.
Tensile strength:70 MPa ISO 527
Tensile modulus:3600 MPa ISO 527
Elongation at break:3,5 % ISO 527
Flexural strength:125 MPa ISO 178
Flexural modulus:3600 MPa ISO 178
Neogel® 8373-W-XXXX UV is an iso/Neopentylglycolgelcoat which has a combination of importantcharacteristics: easy application, good resistance to longimmersion in water (good blister resistance), excellentweather ability (less yellowing), air release, goodmechanical properties, conforms USA ANSI-Z-124-1,approved by DNV Italia and Italian RINA.
Neogel® 8373-W-XXXX UV is an iso/Neopentylglycolgelcoat which has a combination of importantcharacteristics: easy application, good resistance to longimmersion in water (good blister resistance), excellentweather ability (less yellowing), air release, goodmechanical properties, conforms USA ANSI-Z-124-1,approved by DNV Italia and Italian RINA.
Fill out the form below, and we will be in touch shortly.
