Brand: BASF
Chemical name: Tris(2,4-di-tert.-butylphenyl)phosphite
CAS number: 31570-04-4
Chemical formula : Molecular weight 646.9 g/mol
Brand:Ketjenblack®
Chemical family:Electroconductive carbon black
CAS number:1333-86-4
Physical form:Pellets
Chemical name:Electroconductive carbon black
Brand:Nouryon
Apparent bulk density：100-120 kg/m³
Appearance：Black free-flowing pellets
Ash：≤0.1 %
Fines <125 micron: ≤7 %
Grit content: ≤30 mg/kg
Iodine absorption :1000-1100 mg/g
Moisture: ≤0.5 %
pH: 9.0-10.5
Pore volume, DBP: 480-510 ml/100g
Volatiles: ≤1.0 %
Brand: Henkel
Technology：Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Hydrocarbon
Cure：Room temperature cure
Application：Mold Sealer
Application Temperature：13 to 35 °C
Brand: Henkel
Technology：Mold Release
Appearance：Clear, colorless
Chemical Type：Solvent Based Polymer
Odor：Solvent
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Release Coatings
Application Temperature：15 to 60 °C
Brand: Henkel
Technology: Cleaner
Appearance: Clear liquid
Chemical Type: Solvent blend
Odor: Solvent
Cure: Not applicable
Application: Molding
Application Temperature: 20 to 30 °C
Brand: Henkel
Technology：Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Hydrocarbon
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Release Coatings
Application Temperature：13 to 41 °C
Brand: Ineos
Properties at 23 °C
Viscosity, Brookfield RV5, 10 rpm: 7000 mPas ISO 2555
Viscosity, cone&plate: 250 mPas ISO 2884
Geltime, 2% MEKP-50: 7 min ASTM D2471
Brand: Ineos
Properties at 23 °C
Viscosity, Brookfield RV5, 10 rpm: 7000 mPas ISO 2555
Viscosity, cone&plate: 250 mPas ISO 2884
Geltime, 2% MEKP-50: 7 min ASTM D2471
Brand: AOC
Geltime at 25℃ (2ml Butanox M50):10-16 minutes
Peak temperature: 175-190 ℃
Viscosity at 25℃ (#4, rpm2): 30000-36000 mPa.s
Viscosity at 25℃ (#4, rpm20): 4000-5500 mPa.s
Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):35000-60000 mPa.s
Viscosity at 25℃ (#4, rpm20):5700-7300 mPa.s
Geltime at 25℃: 12-18 min
Peel Ply is a fabric layer placed on the surface of a composite laminate which can be removed after curing of the composite to leave a textured surface on the surface of the laminate.
Release film ensures that breather fabric or flow mesh does not bond to the curing resin. By use of various perforation patterns, the amount of resin that is bled out of the laminate can be controlled, to achieve the correct fiber ratio within the composite.
Brand:Tokuyama
Specific surface area:200ÿ240 mÿ2ÿ /g
(BET) Bulk density:40 g/L (approximately)
pH (4% suspension):4.2
SiO2 purity (dry basis): > 99.9 %
Cl:< 50 ppmÿ
Al:< 20 ppmÿ
Fe:< 20 ppmÿ
325 mesh coarse: < 0.01 %
grain moisture (loss on drying method, %):< 1.5 %
Brand:BYK
Density (20 °C): 0.86 g/ml
Non-volatile matter (10 min, 150 °C): 29%
Solvents: Isobutanol/solvent naphtha 9/1
Flash point: 27 °C
Refractive index (20 °C): 1.43
