Brand:BYK
Density (20 °C): 1.10 g/ml
Non-volatile matter (30 min, 150 °C): > 97.0%
Flash point: > 150 °C
Acid value: 8 mg KOH/g
Amine value: 18 mg KOH/g
Brand: EVONIK
Molecular weight：7000 g/mol
Glass transition temperature (solid)：-5 ℃
Density (20 ) (solution):1.10 g/ cm
Flash point：72 ℃
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® FA 4611 should be stored in tightly closed containers and in a cool place. Mix well before use. If separation or turbidity is observed, heat product to 30–40°C and homogenize by stirring.
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® PU 4010 may partially solidify when stored below 10 °C (50 °F). Heat to 35–40 °C (95–104 °F) to reliquify.
Brand:BASF
Physical form:yellowish liquid
Storage：Efka® PU 4063 should be stored in a cool and dry place.
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Blue
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium to High
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Low
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：High
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
Brand: Henkel
Technology：Acrylic
Chemical Type: Methacrylate ester
Appearance (uncured):Opaque, dark purpleLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Application: Sealing
Brand: Henkel
Technology:Acrylic
Chemical Type: Dimethacrylate ester
Appearance (uncured):Green pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Gasketing and Sealing
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured):Yellow pasteLMS
Fluorescence:Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：High, thixotropic
Cure: Anaerobic
Secondary Cure:Activator
Application: Thread sealing
Brand: Henkel
Chemical Type: Methacrylate ester
Appearance (uncured):Green liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Anaerobic
Secondary Cure:Activator
Application：Retaining
Strength: Medium to High
Brand: Henkel
Technology:Acrylic
Chemical Type: Urethane methacrylate
Appearance (uncured):Green liquidLMS
Fluorescence：Positive under UV lightLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Anaerobic
Secondary Cure:Activator
Application：Retaining
Strength: High
Brand: Henkel
Chemical Type: Epoxy
Appearance (Resin):White liquidLMS
Appearance (Hardener)：Gray liquidLMS
Components：Two component – requires mixing
Mix Ratio, by volume -Resin : Hardener：2 : 1
Mix Ratio, by weight -Resin : Hardener：100:50
Cure:Room temperature cure
Application：Bonding
Brand: Henkel
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:20 to 60 °C
Specific Benefit:
● Fast drying
● Non-contaminating transfer
● High thermal stability
● Non-CFC
● No mold build-up
