Brand:Butanox®
Chemical family:Methyl ethyl ketone peroxide, solution in dimethyl phthalate
CAS number:1338-23-4
Physical form:Liquid
Chemical name:methyl ethyl ketone peroxide
Brand:Butanox®
Chemical family:Methyl ethyl ketone peroxide
CAS number:1338-23-4
Physical form:Liquid
Chemical name:methyl ethyl ketone peroxide
Brand:BYK
Amine value:44 mg KOH/g
Acid value:38 mg KOH/g
Density (20 °C): 1.05g/ml
Special Note：BYK-9076 does not contain plasticizers.
Brand:BYK
Density (20 °C): 0.89 g/ml
Epoxy equivalent weight:250-320 g/eq%
Non-volatile matter (10 min., 150 °C):> 90%
Brand:BYK
Acid value: 129 mg KOH/g
Density (20 °C): 1.16 g/ml
Refractive index (20 °C): 1.469
Water content: 0.02%
Active substance: 100%
Brand:BYK
Acid value: 30 mg KOH/g
Density (20 °C): 1.09 g/ml
Refractive index (20 °C): 1.520
Active substance: 40%
Amine value: 30 mg KOH/g
Flash point: > 100 °C
OH value: ca. 265 mg KOH/g
E-Glass Powder Chopped Strand Mat is made of randomly distributed chopped strands held together by a powder binder.
It is compatible with UP, VE, EP, PF resins.
The roll width ranges from 50mm to 3120mm.
Additional demands on wet-out and decomposition time may be available upon request.
Brand: Ineos
Dynamic Viscosity: 325 mPa·s (cps)
Kinematic Viscosity: 300 cSt
Styrene Content: 33 %
Density: 1.08 g/ml
Brand: COVESTRO
Form supplied：approx. 51 % in butyl acetate
NCO content：7.4 ± 0.2 %
Non-volatile content(0.2 g / 60 min / 120°C)：51.0 ± 2.0 %
Viscosity (23 °C)：250 ± 75 mPa·s
Color value (Iod)：≤ 1.0
Monomeric content：< 0.50%
Brand: COVESTRO
Form supplied：approx. 51 % in butyl acetate
NCO content：7.4 ± 0.2 %
Non-volatile content(0.2 g / 60 min / 120°C)：51.0 ± 2.0 %
Viscosity (23 °C)：250 ± 75 mPa·s
Color value (Iod)：≤ 1.0
Monomeric content：< 0.50%
Brand: COVESTRO
Form supplied：approx. 60 % in butyl acetate
NCO content：10.5 ± 0.5 %
Non-volatile content：60.0 ± 2.0 %
Viscosity (23 °C)：2,200 ± 1,000 mPa·s
Iodine color value：≤ 4
Monomeric TDI + HDI：< 0.5%
Brand: COVESTRO
Form supplied：approx. 51 % in butyl acetate
NCO content：8.0 ± 0.3 %
Non-volatile content(0.2 g / 60 min / 120°C)：51.0 ± 2.0 %
Viscosity (23 °C)：1,300 ± 450 mPa·s
Color value (Iod)：≤ 1.0
Monomeric content：< 0.10%
Direct Roving for Filament winding, is compatible with unsaturated polyester, polyurethane, vinyl ester, epoxy and phenolic resins.
Direct Roving for Pultrusion is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins, and is widely used in building & construction, telecommunication and insulator industry.
