Assembled Roving for SMC is compatible with unsaturated polyester, vinyl ester resin, delivering good dispersion after chopping, low fuzz, fast wet out and low static.
Assembled Roving for spray-up is compatible with UP and VE resins.
Brand:BYK
Density (20 °C): 0.81 g/ml
Refractive index (20 °C):1.448
Solvents:Hydrocarbon mixture
Flash point: 95 °C
Brand:BYK
Density (20 °C): 0.89 g/ml
Epoxy equivalent weight:250-320 g/eq%
Non-volatile matter (10 min., 150 °C):> 90%
E-Glass Powder Chopped Strand Mat is made of randomly distributed chopped strands held together by a powder binder.
It is compatible with UP, VE, EP, PF resins.
The roll width ranges from 50mm to 3120mm.
Additional demands on wet-out and decomposition time may be available upon request.
Brand:Deawa
Appearance: Clear liquid
Odor: Hydrocarbon odor
Solvent: Aliphatic hydrocarbons
Specific gravity: 0.760±0.010
Thermal stability after curing: 400°C
Brand:Deawa
Appearance: Clear liquid
Odor: Hydrocarbon
Solvent: Polysiloxane/Fluororesin/hydrocarbon
Relative Density: 0.732 (+/-0.02)
Flash Point: 26℃
Shelf Life: 1 year
Cured Thermal Stability: ≤ 330℃（≤626°F）
Application Temperature: 13 to 135℃（55 to 275°F）
Direct Roving for Filament winding, is compatible with unsaturated polyester, polyurethane, vinyl ester, epoxy and phenolic resins.
Direct Roving for Pultrusion is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins, and is widely used in building & construction, telecommunication and insulator industry.
Brand:BASF
Chemical name:Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate)
CAS number:6683-19-8
Molecular weight 1,178 g/mol
Brand:Ketjenblack®
Chemical family:Electroconductive carbon black
CAS number:1333-86-4
Physical form:Pellets
Chemical name:Electroconductive carbon black
Brand:Nouryon
Apparent bulk density：100-120 kg/m³
Appearance：Black free-flowing pellets
Ash：≤0.1 %
Fines <125 micron: ≤7 %
Grit content: ≤30 mg/kg
Iodine absorption :1000-1100 mg/g
Moisture: ≤0.5 %
pH: 9.0-10.5
Pore volume, DBP: 480-510 ml/100g
Volatiles: ≤1.0 %
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Blue
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Elastomers
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
