Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Medium, thixotropic
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：Medium to High
Brand: Henkel
Chemical Type: Dimethacrylate ester
Appearance (uncured): Red liquid
Fluorescence：Positive under UV light
Components：One component- requires no mixing
Viscosity：Low
Cure: Anaerobic
Secondary Cure：Activator
Application: Threadlocking
Strength：High
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Elastomers
Brand: Henkel
Technology:Cyanoacrylate
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Plastics and Rubbers
Brand: Henkel
Chemical Type: Ethyl cyanoacrylate
Appearance (uncured):Clear liquidLMS
Components：One component- requires no mixing
Viscosity：High
Cure: Humidity
Application: Bonding
Key Substrates：Rubbers, Plastics and Metals
Brand: Henkel
Chemical Type: Alkoxyethyl cyanoacrylate
Appearance (uncured):Transparent, colorless to straw colored liquidLMS
Components：One component- requires no mixing
Viscosity：Low
Cure: Humidity
Application: Bonding
Key Substrates：Metals , Plastics and Elastomers
Brand: Henkel
Chemical Type: Epoxy
Appearance (Resin):Off-whiteLMS
Appearance (Hardener):greenLMS
Appearance (Mixture):Off-whiteLMS
Components:Two part – Resin & Hardener
Mix Ratio, by weight -Resin : Hardener:100:4
Mix Ratio, (by volume)Resin : Hardener:2.5:1
Cure:Room temperature cure after mixing
Secondary Cure:Heat
Application:Bonding
Specific Benefit：
● Machineable
● Sandable
● High service temperature
● Low outgassing properties
● Excellent environmental resistance
Brand: Henkel
Chemical Type: Epoxy
Appearance (Mixed):Steel Colored Paste
Mix Ratio, by volume -Resin : Hardener|：1:1
Mix Ratio, by weight -Resin : Hardener：100 : 56.5
Cure:Room temperature cure after mixing
Application：North America – Metal Repair
Specific Benefit：
● Hardens in ten minutes
● Non sagging
● Steel filled system – cures to metal-like finish
● Bonds to steel, cast iron,stainless steel, concrete,copper, aluminum, and clean and abraded bronze
Brand: Henkel
Chemical Type: Epoxy
Appearance (Resin):White liquidLMS
Appearance (Hardener)：Gray liquidLMS
Components：Two component – requires mixing
Mix Ratio, by volume -Resin : Hardener：2 : 1
Mix Ratio, by weight -Resin : Hardener：100:50
Cure:Room temperature cure
Application：Bonding
Brand: Henkel
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:20 to 60 °C
Specific Benefit:
● Fast drying
● Non-contaminating transfer
● High thermal stability
● Non-CFC
● No mold build-up
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:20 to 60 °C
Specific Benefit:
● Fast drying
● Non-contaminating transfer
● High thermal stability
● Non-CFC
● No mold build-up
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:Clear, colorlessLMS
Odor:Solvent
Cure：Room temperature cure
Cured Thermal Stability:≤400 °C
Application:Release Coatings
Application Temperature:13 to 135 °C
Specific Benefit:
● No chlorinated solvents
● High gloss finish
● High slip
● No contaminating transfer
● No mold build-up
Brand: Henkel
Technology：Mold Release
Appearance：Clear, colorlessLMS
Chemical Type：Solvent Based Polymer
Odor：Hydrocarbon
Cure：Room temperature cure
Application：Mold Sealer
Application Temperature：13 to 35 °C
Brand: Henkel
Technology:Mold Release
Chemical Type: Solvent Based Polymer
Appearance:White or light creme suspensionLMS
Odor:Hydrocarbon
Cure：Room temperature cure
Cured Thermal Stability:≤280 °C
Application:Release Coatings
Application Temperature:15 to 35 °C
Specific Benefit:
● High gloss finish
● Multiple releases
● Minimal mold build-up
● Easy application
● Low odor
● Visible mold coverage
Brand: Henkel
Technology：Mold Release
Appearance：Clear, colorless
Chemical Type：Solvent Based Polymer
Odor：Solvent
Cure：Room temperature cure
Cured Thermal Stability：≤400 °C
Application：Release Coatings
Application Temperature：15 to 60 °C
Brand: Henkel
Technology: Cleaner
Appearance: Clear liquid
Chemical Type: Solvent blend
Odor: Solvent
Cure: Not applicable
Application: Molding
Application Temperature: 20 to 30 °C
We connect global chemical suppliers and customers through a smart,
transparent, and efficient online trading platform — delivering one-stop
sourcing, real-time pricing, compliance documentation, and intelligent
logistics.
