Brand:BYK
Density (20 °C): 0.89 g/ml
Epoxy equivalent weight:250-320 g/eq%
Non-volatile matter (10 min., 150 °C):> 90%
Brand:BYK
Acid value: 129 mg KOH/g
Density (20 °C): 1.16 g/ml
Refractive index (20 °C): 1.469
Water content: 0.02%
Active substance: 100%
Brand:BYK
Acid value: 30 mg KOH/g
Density (20 °C): 1.09 g/ml
Refractive index (20 °C): 1.520
Active substance: 40%
Amine value: 30 mg KOH/g
Flash point: > 100 °C
OH value: ca. 265 mg KOH/g
E-Glass Powder Chopped Strand Mat is made of randomly distributed chopped strands held together by a powder binder.
It is compatible with UP, VE, EP, PF resins.
The roll width ranges from 50mm to 3120mm.
Additional demands on wet-out and decomposition time may be available upon request.
Brand:Deawa
Appearance: Clear liquid
Odor: Hydrocarbon odor
Solvent: Aliphatic hydrocarbons
Specific gravity: 0.760±0.010
Thermal stability after curing: 400°C
Brand:Deawa
Appearance: Clear liquid
Odor: Hydrocarbon
Solvent: Polysiloxane/Fluororesin/hydrocarbon
Relative Density: 0.732 (+/-0.02)
Flash Point: 26℃
Shelf Life: 1 year
Cured Thermal Stability: ≤ 330℃（≤626°F）
Application Temperature: 13 to 135℃（55 to 275°F）
Brand: Ineos
Dynamic Viscosity: 325 mPa·s (cps)
Kinematic Viscosity: 300 cSt
Styrene Content: 33 %
Density: 1.08 g/ml
Direct Roving for Filament winding, is compatible with unsaturated polyester, polyurethane, vinyl ester, epoxy and phenolic resins.
Direct Roving for Pultrusion is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins, and is widely used in building & construction, telecommunication and insulator industry.
Brand:BYK
Density (20 °C): 1.10 g/ml
Non-volatile matter (30 min, 150 °C): > 97.0%
Flash point: > 150 °C
Acid value: 8 mg KOH/g
Amine value: 18 mg KOH/g
Brand:Invista
IUPAC Name：2-methylpentane-1,5-diamine
CAS Number：15520-10-2
Molecular Formula ：C6H16N2
Molecular Weight： 116.208 g/mol
Description： Clear low viscosity liquid, free of suspended materials
Brand:BASF
Physical form:clear to slightly hazy brownish liquid
Storage：Efka® FA 4608 should be stored in a cool dry place. Storage at temperatures below 10 °C (50 °F) may lead to partial solidification. Reliquefy by heating contents to 35 – 40 C (95 –102 °F).
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® FA 4609 should be stored in tightly closed containers and in a cool place. Mix well before use. In case of separation or turbidity heat-up to 30 – 40 °C and stir.
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® FA 4611 should be stored in tightly closed containers and in a cool place. Mix well before use. If separation or turbidity is observed, heat product to 30–40°C and homogenize by stirring.
Brand:BASF
Physical form:transparent, yellowish liquid
Storage：Efka® FA 4644 should be stored in a cool and dry place.
Brand:BASF
Physical form:clear, slightly yellowish liquid
Storage：Efka® PA 4401 should be kept in a cool and dry place.
