VE MOULD GELCOAT
Neogel® 8366-W-0100 is a Vinyl Ester type gelcoat, developed to manufacture moulds.
| Supplier | |
|---|---|
| Resin Type | Vinyl Resin |
| Pre-promotion Thixotropy | / |
| Molding Process | Filament Winding, Hand Lay-up, Spraying |
| Industry | Automotive & Transportation, Building & Construction, Marine Vessels, Paints & Coatings |
Neogel® 8366-W-0100 has good general performance,which is easy to apply and to repair. It has high gloss,high elongation at break as well as excellent styrene resistance.
Neogel® 8366-W-0100 is pre-accelerated, ready for use. It can be cured with standard MEKP (Butanox M50 or equivalent),without any foaming (microporosity), which is typical for many
traditional vinyl ester resins. The gelcoat has excellent spray
properties and can be applied with conventional spray
equipment with the following recommended settings:
• Spray gun: nozzle ∅ 2.5-3.5 mm, pressure 4-5 bar.
• Airless equipment: nozzle 19/40 or 17/40 for smaller moulds, pressure 3.5–4 bar, air assist maximum (6 bars). Due to the relatively small nozzle it is recommended to use an internal
filter of 100 mesh at the spray gun.
To make chemical sourcing more efficient reliable, and intelligent
Every process of our packaging is very strict
just to betterdeliver the goods to your hands!
Brand: AOC
Appearance: Thixotropic liquid
Viscosity at 25℃ (#4, rpm2):(Typical ValueBase Gelcoat Brush：26000-45000 mPa.s);（Typical Value Base Gelcoat Spray：22000-40000 mPa.s)
Viscosity at 25℃ (#4, rpm20)：(Typical ValueBase Gelcoat Brush：6500-10000 mPa.s);（Typical Value Base Gelcoat Spray：3500-5000 mPa.s)
Gel time at 25 ℃: 10-20 min
