Sealant Tape is typically used whenever an air tight seal is required and will adhere to most surfaces. It is most commonly used in the composite manufacturing process of temporary as well as permanent vacuum bagging.
| Name | Thickness | Length | Width | Colour | Maximum Use Temperature | Material Type | Storage Life |
| HW100 | 0.0787inch(2mm) | 49feet/Roll,20 Rolls/box | 0.3937inch(10mm) | Black | 248°F(120℃) | It has excellent cost performance Suitable for vacuum infusion flow | One year |
| HW100 | 0.0984inch(2.5mm) | 49feet/Roll,20 Rolls/box | 0.4724inch(12mm) | Black | 248°F(120℃) | It has excellent cost performance Suitable for vacuum infusion flow | One year |
| H150 | 0.1181inch(3mm) | 24feet/Roll,36 Rolls/box | 0.5118inch(13mm) | Black | 248°F(120℃) | Can be used repeatedly at room temperature Suitable for vacuum infusion flow | One year |
| H150 | 0.1181inch(3mm) | 49feet/Roll,20 Rolls/box | 0.5118inch(13mm) | Black | 248°F(120℃) | Can be used repeatedly at room temperature Suitable for vacuum infusion flow | One year |
| HW150 | 0.0984inch(2.5mm) | 24feet/Roll,36 Rolls/box | 0.4724inch(12mm) | Yellow | 302°F(150°℃) | It has excellent cost perfommance Suitable for over process | One year |
| HW150 | 0.0984inch(2.5mm) | 49feet/Roll,20 Rolls/box | 0.4724inch(12mm) | Yellow | 302°F(150°℃) | It has excellent cost perfommance Suitable for over process | One year |
| H150 | 0.1181inch(3mm) | 24feet/Roll,36 Rolls/box | 0.5118inch(13mm) | Gray | 320°F(160℃) | It has excellent cost perfommance Suitable for over process | One year |
| H150 | 0.1181inch(3mm) | 49feet/Roll,20 Rolls/box | 0.5118inch(13mm) | Gray | 320°F(160℃) | It has excellent cost perfommance Suitable for over process | One year |
| H200 | 0.1181inch(3mm) | 24feet/Roll,36 Rolls/box | 0.5118inch(13mm) | Yellow | 392°F(200C) | Easy to peel off after below 80°C and no residual glue Suitable for autoclave process | One year |
| H200 | 0.1181inch(3mm) | 49feet/Roll,20 Rolls/box | 0.5118inch(13mm) | Yellow | 392°F(200C) | Easy to peel off after below 80°C and no residual glue Suitable for autoclave process | One year |
| H230 | 0.1181inch(3mm) | 24feet/Roll,36 Rolls/box | 0.5118inch(13mm) | Green | 446°F(230°℃) | Easy to peel off after below 80°C and no residual glue Suitable for autoclave process | One year |
| H230 | 0.1181inch(3mm) | 49feet/Roll,20 Rolls/box | 0.5118inch(13mm) | Green | 446°F(230°℃) | Easy to peel off after below 80°C and no residual glue Suitable for autoclave process | One year |
| H280 | 0.1181inch(3mm) | 24feet/Roll,36 Rolls/box | 0.5118inch(13mm) | Blue | 536°F(280°℃) | It has a high stick relay Suitable for autoclave process | One year |
| H400 | 0.1181inch(3mm) | 24feet/Roll,36 Rolls/box | 0.5118inch(13mm) | Light Green | 752°F(400°℃) | It needs to be used together with H230 Suitable for autoclave process | One year |
Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:75-91-2
Physical form:Liquid
Molecular Weight:90.1
Chemical name:tert-Butyl hydroperoxide, 70% solution in water
Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:94-36-0
Physical form:Granular powder
Chemical name:Dibenzoyl peroxide
Brand：Trigonox
Chemical family：Organic peroxide
CAS number：26748-41-4
Physical form：Liquid
Molecular Weight：244.4
Chemical name：tert-Butyl peroxyneodecanoate, 75% solution in isododecane
Brand:Polylite
Appearance:Clear liquid,no visible mechanical impurity
Colour(Hazen):40 Max
Epoxy Equivalent(g/mol):210-230
Hydrolytic Chlorine (%):0.50 Max
Inorg.Cl （mg/kg）:50 Max
Volatile /150℃,40min(%):0.6 Max
Softening Point(℃):14-23
Brand:Polylite
Appearance: Semi-solid
Epoxy equivalent (g/eq): 170-190
*Hue(G): 3.0Max.
Flash point (℃): 250↑
Solution viscosity (25℃): H~K
Density (g/cm³ 20℃): 1.18
Brand:Polylite
Appearance: light yellow transparent liquid
Density: 1.06±0.02kg/L
Viscosity: 430±150 cps (LVT#3-60rpm/25℃)
Solid content: 62±1.5%
Gelation time: 15-25 minutes
