AOC Neogel® 8393-W-XXXX Vinyl Mold Gelcoat

Vinyl mold gel coat
Neogel® 8393-W-XXXX mold gelcoat is specially designed for the manufacture of FRP molds. It is especially used when high productivity is required and to increase mold turnover by heating, and is also suitable for FRP products that require high mechanical properties and corrosion protection.

Additional information

Products Brand

Resin Type

Vinyl Resin

Pre-promotion Thixotropy

TP

Resin Features

Vinyl Mold Gelcoat

Molding Process

Hand Lay-up, Spraying

Industry

Automotive & Transportation, Building & Construction, Home Renovation, Marine Vessels, Petrochemical, Wind Energy

Characteristic Performance

Neogel® 8393-W-XXXX is a vinyl mold gel coat. It has excellent overall properties, easy handling, high gloss, high hardness, excellent mechanical properties and outstanding styrene resistance at high temperatures.

Usage Characteristics

Neogel® 8393-W-XXXX is a pre-promoted, thixotropic gelcoat. Available in black, orange and gray.

Neogel® 8393-W-XXXX has excellent spray performance and can be operated with conventional equipment:

  • For compressed air guns, a nozzle diameter of 2.5-3.5 mm and a spray pressure of 4-5 atmospheres are required.
  • For non-air guns, the recommended nozzle type is 19/40 or 17/40 at 3.5-4 atmospheres.

In order to obtain the best results, we recommend that our customers ensure the following construction conditions:

  • Stir each pail of gelcoat slowly and thoroughly before use to avoid air bubbles brought in by high-speed shearing.
  • Gelcoat use at 18°C to 25°C
  • Relative humidity below 75%
  • Use MEKP* curing agent solution at a concentration of 501 TP3T at a dosage of 1.51 TP3T – 2.01 TP3T.
  • Wet film thickness of not less than 600-800um, sprayed in two coats, the first wet film in the 300-400um, and so fully cured and then the second operation, the thickness of 400um.
  • In order to extend the service life of the mold, the mold needs to be post-cured before use.
    *Butanox M50 (Akzo Nobel)

Packaging, Storage and Custody

Neogel® 8393-W-XXXX is available in packages of about 22 kg (depending on coloring). Store the product in its original unopened packing condition at a temperature of not more than 20°C. Keep out of direct sunlight and avoid heat sources. In this way, Neogel® 8393-W-XXXX has a stabilized storage period of three months from the time of dispatch.
Neogel® 8393-W-XXXX has a flash point > 21°C and is flammable. Keep the product away from open flames during storage and use. Refer to the product safety data sheet for specific information.

Typical matrix gel coat liquid properties

performances Test Methods unit (of measure) typical value
Gel time at 25°C TM 2245 minutes 10-16
exothermic peak TM 2245 175-190
Viscosity at 25°C (rpm2) TM 5042 mPa.s 30000-36000
Viscosity at 25°C (rpm20) TM 5042 mPa.s 4000-5500

Typical Matrix Gelcoat Casting Body Properties

performances Test Standards unit (of measure) typical value
barcolithic hardness D 2583-67 >45
HDT 66 PSI(*) D 648 >130
Elongation at break D 639 % >3.0

Available colors and grades

color Gelcoat Grade
ferrous Neogel® 8393-W-0100
orange (color) Neogel® 8393-W-0520
light green Neogel® 8393-W-9617
grizzly Neogel® 8393-W-9737

Perkadox BC-FF Organic peroxides

Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:80-43-3
Physical form:Crystal
Molecular Weight:270.4
Concentration:5.86% min.
Chemical name:Dicumyl peroxide

Trigonox A-W70 Organic peroxides

Brand:Trigonox®
Chemical family:Organic peroxide
CAS number:75-91-2
Physical form:Liquid
Molecular Weight:90.1
Chemical name:tert-Butyl hydroperoxide, 70% solution in water

Trigonox 25-C75 Organic peroxides

Brand:Trigonox
Chemical family:Organic peroxide
CAS number:927-07-1
Physical form:Liquid
Molecular Weight:174.2
Concentration:6.89%
Chemical name:tert-Butyl peroxypivalate, 75% solution in isododecane

Butanox LPT-IN Methyl ethyl ketone peroxide in diisononyl phthalate

Brand:Butanox®
Chemical family:Organic peroxide
CAS number:1338-23-4
Physical form:Liquid
Chemical name:Methyl ethyl ketone peroxide in diisononyl phthalate

Trigonox V388 Methyl ethyI ketone peroxide

Brand:Trigonox
Chemical family:Organic peroxide
CAS number:1338-23-4
Physical form:Liquid
Chemical name:Methyl ethyl ketone peroxide, in solvent mixture

ZC-907 Vinyl Resin

Appearance: light yellow transparent liquid
Density: 1.06±0.02kg/L
Viscosity: 430±150 cps (LVT#3-60rpm/25℃)
Solid content: 62±1.5%
Gelation time: 15-25 minutes

Get a Quote

Get a Quick Quote

Fill out the form below, and we will be in touch shortly.