LOCTITE® FREKOTE FMS™ is formulated specifically as a sealer for fiberglass reinforced polyester, epoxy and other composite molds commonly used in the fiberglass molding industry. LOCTITE® FREKOTE FMS™ must be used when using green, or new, molds with microporosity and other slight surface imperfections.
| Supplier | |
|---|---|
| Additive Classification | Mold Release Agents |
| Industry | Automotive & Transportation, Building & Construction, Marine Vessels, Petrochemical |
| Specific Gravity @ 25 °C | 0.757 to 0.771LLMS |
| Flash Point | See SDS |
Brand:Polylite
Appearance:Light yellow transparent viscous liquid
Acid Value:14-20mgKOH/g
Viscosity，25℃:0.14-0.16Pa.s
Solid Content:52-58%
Gel time:25-38min
Brand：Trigonox®
Chemical family：Organic peroxide
CAS number：80-15-9
Physical form：Liquid
Molecular Weight：152.2
Chemical name：Cumyl hydroperoxide
Brand：Perkadox®
CAS number：94-36-0
Molecular Weight：242.2
Concentration：3.20-3.37%
Chemical name：Dibenzoyl peroxide, paste, 50% in dipropylene glycol dibenzoate and water
Brand:Perkadox®
Chemical family:Organic peroxide
CAS number:94-36-0
Physical form:Granular powder
Chemical name:Dibenzoyl peroxide
Brand:Butanox®
Chemical family:Organic peroxide
CAS number:1338-23-4
Physical form:Liquid
Chemical name:Methyl ethyl ketone peroxide in diisononyl phthalate
Brand:Butanox®
Chemical family:Organic peroxide
CAS number:1338-23-4
Physical form:Liquid
Chemical name:Methyl ethyl ketone peroxide, solution in dimethyl phthalate
